DTC P30F2: DISCHARGE CONTROL
DTC Description
DTC DETECTION LOGIC
NOTE: Prolonged cranking due to running out of gasoline may cause the detection of this DTC.
DTC DETECTING CONDITION
DTC Trouble diagnosis (Trouble diagnosis contents) DTC detecting condition
P30F2 DISCHARGE CONTROL (Discharge control) When SOC usage range is not satisfied and the output (discharge) continues.
POSSIBLE CAUSES
DC/DC junction box
Li-ion battery controller
HPCM
Traction motor inverter
Between DC/DC junction box and Li-ion battery controller harness
Out of gasoline
FAIL-SAFE
The engine cannot be started.
Illuminate hybrid system warning lamp.
DTC CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC P0AC0, P0AC1 or P0AC2 is displayed with DTC P30F2, first perform the confirmation procedure (trouble diagnosis) for DTC P0AC0, P0AC1 or P0AC2.
Is applicable DTC detected?
YES: Perform diagnosis of applicable.
P0AC0: Refer to "DTC DESCRIPTION".
P0AC1: Refer to "DTC DESCRIPTION".
P0AC2: Refer to "DTC DESCRIPTION".
NO: GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE
WITH CONSULT
Turn ignition switch ON and wait at least 10 seconds.
Select "Self Diagnostic Result" mode of "HV BAT" using CONSULT.
Is P30F2 detected?
YES: Refer to "DIAGNOSIS PROCEDURE".
NO-1: To check malfunction symptom before repair: Refer to " INTERMITTENT INCIDENT ".
NO-2: Confirmation after repair: INSPECTION END
Diagnosis Procedure
PERFORM SELF-DIAGNOSIS
WITH CONSULT
Perform "All DTC Reading" with CONSULT.
Is DTC detected?
YES: Perform diagnosis procedure of applicable DTC.
NO: Replace Li-ion battery.
