-
Постов
57 -
Зарегистрирован
-
Победитель дней
24
Активность репутации
-
fantomel отреагировална пост THC в Активация всех марок машин для EasyDiag. Пошаговая инструкция (Бесплатно)
Прошивка 11.55 iDiag / M-Diag / Pro будет корректно работать на EasyDiag / M-Diag с Boot Loader 1.01.052, 1.03.00 (версия диагностического ПО 2.24)
На новых адаптерах EasyDiag с Boot Loader 1.23.001 прошивка 11.55 работать не будет (версия диагностического ПО 10.01) !
В прошивке 11.55 есть интересная особенность, добавлен байт счётчик. К чему бы это ?
Прошивка 11.54 / 11.55
-
fantomel отреагировална пост Ecuador в Активация всех марок машин для EasyDiag. Пошаговая инструкция (Бесплатно)
Я не оформитель
-
fantomel получил реакцию от Dimaas в Активация всех марок машин для EasyDiag. Пошаговая инструкция (Бесплатно)
X-431 PAD FW
Download_X431_PAD_V11_35_EN.zip
Download_X431_PAD_V11_37_EN.zip
Download_X431_PAD_V11_48_EN.zip
Download_X431_PAD_V11_49_EN.zip
Download_X431_PAD_V11_54_EN.zip
-
fantomel получил реакцию от nikita1 в Активация всех марок машин для EasyDiag. Пошаговая инструкция (Бесплатно)
X-431 PAD FW
Download_X431_PAD_V11_35_EN.zip
Download_X431_PAD_V11_37_EN.zip
Download_X431_PAD_V11_48_EN.zip
Download_X431_PAD_V11_49_EN.zip
Download_X431_PAD_V11_54_EN.zip
-
fantomel получил реакцию от ViktorKR в Fgtech Galletto V54 Fix Ept Hex Dump & Program For 0475 And 0386
FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
What you can find here:
1.For tool number 0386: ept file,fix file,hex dump and 2 versions of programs V54 used for it, the one from china and the AES November software.
2.For tool number 0475: ept file,fix file, hex dumps made from my tool and program V54 for it that does not need time back.
3.For both tools you have here how to connect to it, how to read firmware movie, how to write dump that you wish.
Reading and writing the mcu for this tool can be done with old Philips LPC 2000 software and USB-TTL adapter, preferd the one that uses PL2303 chipset. You need also a jumper in position to do that.
If you want to check CRP level of your NXP LPC2119 mcu you can do that with FlashMagic and USB-TTL adapter.
CRP LEVELS EXPLAINED:
GALLETTO COMPLETE FANTOMEL.txt
-
fantomel получил реакцию от lbotos в Fgtech Galletto V54 Fix Ept Hex Dump & Program For 0475 And 0386
Take the pack, you have all there. You can make your tool what version you want.
Возьмите пачку, у вас есть все там. Вы можете сделать свой инструмент, какую версию вы хотите.
-
fantomel получил реакцию от no-name в Активация всех марок машин для EasyDiag. Пошаговая инструкция (Бесплатно)
X-diag'S
-
fantomel получил реакцию от Dimaas в Активация всех марок машин для EasyDiag. Пошаговая инструкция (Бесплатно)
X-diag'S
-
fantomel получил реакцию от shokunin в Активация всех марок машин для EasyDiag. Пошаговая инструкция (Бесплатно)
X-diag'S
-
fantomel получил реакцию от saturn в Обсуждение активаций,работы,цен,качества и т.д Launch EasyDiag и Launch iDiag
EOBD + DEMO все Idiag+EasyDiag
-
fantomel отреагировална пост gene1 в Активация всех марок машин для EasyDiag. Пошаговая инструкция (Бесплатно)
https://yadi.sk/d/9HKUOZFU3DFBoP
Работает без глюков.
Конве и Художнику огромное спасибо!
За очередной минус тоже большое спасибо.
-
fantomel получил реакцию от transit в Fgtech Galletto V54 Fix Ept Hex Dump & Program For 0475 And 0386
FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
What you can find here:
1.For tool number 0386: ept file,fix file,hex dump and 2 versions of programs V54 used for it, the one from china and the AES November software.
2.For tool number 0475: ept file,fix file, hex dumps made from my tool and program V54 for it that does not need time back.
3.For both tools you have here how to connect to it, how to read firmware movie, how to write dump that you wish.
Reading and writing the mcu for this tool can be done with old Philips LPC 2000 software and USB-TTL adapter, preferd the one that uses PL2303 chipset. You need also a jumper in position to do that.
If you want to check CRP level of your NXP LPC2119 mcu you can do that with FlashMagic and USB-TTL adapter.
CRP LEVELS EXPLAINED:
GALLETTO COMPLETE FANTOMEL.txt
-
fantomel отреагировална пост Ecukey в Обсуждение активаций,работы,цен,качества и т.д Launch EasyDiag и Launch iDiag
We are humman...the same all.
I like soviet and i like russian
-
fantomel отреагировална пост Oleg2016 в Обсуждение активаций,работы,цен,качества и т.д Launch EasyDiag и Launch iDiag
Сразу видно, наш, советский.
Как грибы растут... Не по дням, а по часам растет население Российской федерации...
Город то какой выбран, там, наверное, все население бредит изидигами...
А еще он что-то может значить на инопланетном языке.
P.S. Сегодня узнал, что по-польски, слово "урода" в переводе на русский, означает "красота"...
-
fantomel получил реакцию от vd1111 в Модифицированная Версия Op-Com Vaux-Com_120309A_Mod+1.59
In newer cars you need CH-CAN protocol.
Adam - EPS
Zafira C - IMU, SAS, SADS
Insignia - IMU, SAS, SADS
Mokka - IMU, SAS
Cascada - IMU, SAS, SADS
Astra J - IMU, SAS, SADS
Apera - IMU, SAS
So you need at least Revision C to connect to this controllers and china has only B.
-
fantomel отреагировална пост KholmS в Обсуждение активаций,работы,цен,качества и т.д Launch EasyDiag и Launch iDiag
-
fantomel отреагировална пост ivanovbg в Обсуждение активаций,работы,цен,качества и т.д Launch EasyDiag и Launch iDiag
https://yadi.sk/d/tj1AumrajGDCU
-
fantomel получил реакцию от Saimon в Kess V2.09 (программа и хелпы)
BINGO Here is what i have until now: https://yadi.sk/d/f2fc0Nyshcg5B
All i could find in one place.
-
fantomel получил реакцию от Andrey1842 в Actia Multi-Diag Collection 2009 2010 2011 2012 2013 2014 2015
ACTIA MULTI-DIAG COLLECTION 2009 2010 2011 2012 2013 2014 2015
So, Long Story Short, what you Will Find Inside:
1. Actia Multi-Diag I 2009 v.16.21
2. Actia Multi-Diag I 2010 v.19.10
3. Actia Multi-Diag III 2010 v.21
4. Actia Multi-Diag II 2011 v.23.07 + Vivid WorkShop
5. Actia Multi-Diag III 2011 v.24.01 + Service Pack 3 v.24.31
6. Actia Multi-Diag I 2012 v.25.13
7. Actia Multi-Diag II 2012 v.26.08.1 + Service Pack 2 v.26.25 + Vivid WorkShop
8. Actia Multi-Diag III 2012 v.27.06 + Service Pack 2 v.27.21 + Vivid WorkShop
9. Actia Multi-Diag I 2013 v.27.31 + Vivid WorkShop
10. Actia Multi-Diag II 2013 v.28.08 + Service Pack 1 v.28.11
11. Actia Multi-Diag III 2013 v.29.04 + Service Pack 1 v.29.11 + Service Pack 2 v.29.21
12. Actia Multi-Diag IV 2013 v.30.06 + Service Pack 1 v.30.11 + Service Pack 2 v.30.21
13. Actia Multi-Diag I 2014 v.31.09 + Service Pack 1 v.31.11 + Service Pack 2 v.31.21 + Vivid WorkShop
14. Actia Multi-Diag II 2014 v.32.05 + Service Pack 1 v.32.11
15. Actia Multi-Diag I 2015 v33 + Service Pack 1 v.33.11 + Service Pack 2 v33.21 + Vivid WorkShop
16. ALL keygens FROM TO V.33 v.19 [/ align]
If you need Password for a file , it's like Always fantomel
MY ACTIA MULTI-DIAG COLLECTION.txt
-
fantomel отреагировална пост ivanovbg в Обсуждение активаций,работы,цен,качества и т.д Launch EasyDiag и Launch iDiag
Как хочеш, я ползую без страхом и небъйло проблем. Ест диларская, но очен медлено! На Мерцедес сделал на версия 48.11
Доступни спец функции, исполнителние механизми...
Кто хочет парол в личку после +
-
fantomel получил реакцию от CHIPOK Performance в Fgtech Galletto V54 Fix Ept Hex Dump & Program For 0475 And 0386
FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
What you can find here:
1.For tool number 0386: ept file,fix file,hex dump and 2 versions of programs V54 used for it, the one from china and the AES November software.
2.For tool number 0475: ept file,fix file, hex dumps made from my tool and program V54 for it that does not need time back.
3.For both tools you have here how to connect to it, how to read firmware movie, how to write dump that you wish.
Reading and writing the mcu for this tool can be done with old Philips LPC 2000 software and USB-TTL adapter, preferd the one that uses PL2303 chipset. You need also a jumper in position to do that.
If you want to check CRP level of your NXP LPC2119 mcu you can do that with FlashMagic and USB-TTL adapter.
CRP LEVELS EXPLAINED:
GALLETTO COMPLETE FANTOMEL.txt
-
fantomel получил реакцию от Andrey1842 в Модифицированная Версия Op-Com Vaux-Com_120309A_Mod+1.59
Op-Com firmware 1.33 to 1.60 + ocflash + ocflash pro
OcFlash+OcFlashPro+Firmware 1.33to1.60.rar
-
fantomel получил реакцию от Alega67 в Всё По Китайским Ids Vcm Ii
Nice to see my collection got here also
All that original is here without password.
https://mega.nz/#F!jlEznS5T!RUFpBlVz3Tx6MjStcyoFYg
Приятно видеть мою коллекцию попал сюда тоже
Все, что оригинал здесь без пароля.
https://mega.nz/#F!jlEznS5T!RUFpBlVz3Tx6MjStcyoFYg
-
fantomel получил реакцию от BMW_gg в Fgtech Galletto V54 Fix Ept Hex Dump & Program For 0475 And 0386
FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
What you can find here:
1.For tool number 0386: ept file,fix file,hex dump and 2 versions of programs V54 used for it, the one from china and the AES November software.
2.For tool number 0475: ept file,fix file, hex dumps made from my tool and program V54 for it that does not need time back.
3.For both tools you have here how to connect to it, how to read firmware movie, how to write dump that you wish.
Reading and writing the mcu for this tool can be done with old Philips LPC 2000 software and USB-TTL adapter, preferd the one that uses PL2303 chipset. You need also a jumper in position to do that.
If you want to check CRP level of your NXP LPC2119 mcu you can do that with FlashMagic and USB-TTL adapter.
CRP LEVELS EXPLAINED:
GALLETTO COMPLETE FANTOMEL.txt
-
fantomel отреагировална пост саныч74 в Fgtech Galletto V54 Fix Ept Hex Dump & Program For 0475 And 0386
https://yadi.sk/d/hJLt25AdmKjQB У кого ссылки не работают….