NISSAN LCN pin code

[igorenya 0]

J-flash v8.92.

Обираю ARM9. S29GL512N. (Тільки галочка 507)

Connected Successful.

Read back, selected sectors.

Маю таке:

Failed to read back RAMCode for verification. Failed to prepare for programing. Failed to download RAMCode! Failed to read back target memory.

Що я роблю не так? Раз доєдналосся - має читати... 

(Фото чомусь не вставляються)

[best7320 31]

19 годин назад, igorenya сказав:

J-flash v8.92.

Обираю ARM9. S29GL512N. (Тільки галочка 507)

Connected Successful.

Read back, selected sectors.

Маю таке:

Failed to read back RAMCode for verification. Failed to prepare for programing. Failed to download RAMCode! Failed to read back target memory.

Що я роблю не так? Раз доєдналосся - має читати... 

(Фото чомусь не вставляються)

Спробуйте цим проектом, буває не всі опції правильно виставлені

NISSAN FILES.rar

[igorenya 0]

34 минуты назад, best7320 сказал:

Спробуйте цим проектом, буває не всі опції правильно виставлені

NISSAN FILES.rarПолучение информации...

Connecting ...
 - Connecting via USB to J-Link device 0
 - Target interface speed: 12000 kHz (Fixed)
 - VTarget = 3.404V
 - Executing init sequence ...
    - Initialized successfully
 - Target interface speed: 12000 kHz (Fixed)
 - J-Link found 3 JTAG devices. Core ID: 0x0692602F (None)
 - Connected successfully
Reading selected sectors ...
 - 512 of 512 sectors selected, 1 range, 0x28000000 - 0x2BFFFFFF
 - Start of determining flash info (Bank 0 @ 0x28000000)
 - End of determining flash info
 - Flash bank info:
 - 512 * 128 KB @ 0x28000000
 - Start of preparing flash programming
 - ERROR: Failed to read back RAMCode for verification.
 - ERROR: Failed to prepare for programming.
Failed to download RAMCode!
 - End of preparing flash programming
 - ERROR: Failed to read back target memory
Disconnecting ...
 - Disconnected
---------------------------------------------

Application log started
 - J-Flash V6.32g (J-Flash compiled Jun 15 2018 17:26:32)
 - JLinkARM.dll V6.32g (DLL compiled Jun 15 2018 17:26:15)
Opening project file [C:\Users\Igor\Desktop\OMAP_PROJECT_MOY.jflash] ...
 - Project opened successfully
Failed to open data file [C:\Users\WORK\Desktop\IAAIEOIEU\nissan\Nissan LCN\266.bin]...
Connecting ...
 - Connecting via USB to J-Link device 0
 - Target interface speed: 12000 kHz (Fixed)
 - VTarget = 3.404V
 - Executing init sequence ...
    - Initialized successfully
 - Target interface speed: 12000 kHz (Fixed)
 - J-Link found 3 JTAG devices. Core ID: 0x0692602F (None)
 - Connected successfully
Reading selected sectors ...
 - 1 of 512 sectors selected, 1 range, 0x2BF60000 - 0x2BF7FFFF
 - Start of determining flash info (Bank 0 @ 0x28000000)
 - End of determining flash info
 - Flash bank info:
 - 512 * 128 KB @ 0x28000000
 - Start of preparing flash programming
 - ERROR: Verification of RAMCode failed @ address 0x00000000.
Write: 0xE7FEE7FD E09CE083
Read: 0xEA000A65 EA000005
 - ERROR: Failed to prepare for programming.
Failed to download RAMCode!
 - End of preparing flash programming
 - ERROR: Failed to read back target memory
Disconnecting ...
 - Disconnected