-
Постов
57 -
Зарегистрирован
-
Победитель дней
24
Тип контента
Профили
Форумы
Загрузки
Сообщения, опубликованные fantomel
-
-
OP-COM 131223c + 150406b DB 2015 + OcFlash for HQ Clone
Modified OP-COM 131223c with 150406b database from 2015 for HQ OP-COM Clone.
Also program for firmware update.
Keep in mind that 2015 version works with firmware 1.64 but in pack last firmware is 1.60.
-
- euromarina1, stk7554, ksv и 3 других
- 6
-
CDP+ Delphi Autocom Firmware Recovery,OTP Area,FirmwaresSo i was thinking these days to make a full pack at day regarding the the firmware our CDP+ interfaces.As you all know we can flash our interface SAFE only inside Delphi 2012.3 (last version without clone blacklist) or in these days inside WOW (no matter what version).We (at least me) prefer to write the firmware with WOW because like this i can use wow and delphi-autocom without problems since WOW writes some extra bits that delphi-autocom does not detect but wow does.Story short, what will you find inside this pack:1. Mprog 3.5 and ept file for CDP+ (never seen one that has this problem)2. How to recover your CDP+ from a bad flash or red lights problem via USB.3. How to read your firmware with a ST-Link device via CDP+ J400 connector and also pinout of STLink to J4004. How to read the OTP (One Time Programming) area responsable for the serial number of your interface - BE CAREFUL . This area can be modified only by incrementing the actual serial number in the already written ST chip or you can write any number in a new one if you know how.5. Flash Loader Demonstrator v2.6.0 to restore your firmware via USB6. STM32 ST-Link Utility v3.4.0 to read firmware and otp and if you are willing to risk to change them.6. OTP area for CDP+ Clone 100251 bin file.7. Firmware from programs: 1321 from WOW ;1331 from delphi, autocom, wow; 1410 from WOW, 1422 from Delphi and 1423 from Autocom.8. Firmware recovery to flash your CDP+ interface in case of upgrade or bad flash:a) Old ones already on web:2012.2; 2012.3; 2013.1; 2013.2.1; 2013.2.2; 2013.3.My flash files written to CDP+ by WOW and read via ST-Link saved as .bin,.hex,.s19,.srec from my clone CDP+ FOR RECOVERY2013.3 - Firmware 13312014.1 - Firmware 14102014.2 - Firmware 1422 from Delphi2014.2 - Firmware 1423 from Autocom9. 24.12.2014 Firmware 1430 from Autocom 2014 R3 2.14.310. 24.12.2014 New pack with RECOVERY FIRMWARE 1430 .bin,.hex,.s19,.srec included and all from 1->9If you find something wrong or to add to this pack please write.All you need to play with your CDP+ interface it's a ST-Link V2 Programmer CLONE like these HERE or the Original.If you need a password for a file, like always it's fantomel11. - 12.04.2015 - Added to MY COLLECTION for CDP and CDP+ Firmware 1513 from AUTOCOM 2015 R1 2.15.112. - 12.04.2015 - Added MY COLLECTION for CDP and CDP+ where you will find all above + Complete Install kits to Delphi and Autocom 2013.3 , All my WOW 4 and 5 Collection, All Genuine Kits of 2014 and also The mixed 2014.1 Version with 2 patches(one already present in main archive and another one separated) - a little late but i forgot to post this also here.13. - 20.04.2015 - Added to MY COLLECTION for CDP and CDP+ Firmware 1424 and 1430 from Wurth Group for WOW and W.EASY14. - 07.05.2015 - Added to MY COLLECTION for CDP and CDP+ Firmware 1515 from Wurth Group for WOW and W.EASY
-
Since i have seen that ppl try to use newer op-com versions to their china cloned interface and a lot of them have bricked them i have made a tutorial on how to restore it by USB and not with a programmer.Remember this is for PIC MCU not for FTDI chip (that can be flashed with MPROG).If you like my post and it helped you please press THANKS.
-
Database is 3.38 , logo 3.40
-
I wanted 2.07 or 2.09 if you have to play a little. Do you still have them?
Я хотел 2,07 или 2,09, если у вас есть, чтобы играть немного. Вы до сих пор их?
-
You are welcome, confirmed it's working on Windows 7 and Windows 8 by other users.
Вы можете подтвердил, что он работает на Windows 7 и Windows 8 от других пользователей.
-
you have there program already done for you. No need to write hex if you are on 0475 and you can use regular fix that you have already in case of problems. Diver for interface it's inside program after install.
P.S. Disable antivirus because v54 for 0475 is VMProtect packed.
-
- Популярный пост
- Популярный пост
FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386What you can find here:1.For tool number 0386: ept file,fix file,hex dump and 2 versions of programs V54 used for it, the one from china and the AES November software.2.For tool number 0475: ept file,fix file, hex dumps made from my tool and program V54 for it that does not need time back.3.For both tools you have here how to connect to it, how to read firmware movie, how to write dump that you wish.Reading and writing the mcu for this tool can be done with old Philips LPC 2000 software and USB-TTL adapter, preferd the one that uses PL2303 chipset. You need also a jumper in position to do that.If you want to check CRP level of your NXP LPC2119 mcu you can do that with FlashMagic and USB-TTL adapter.CRP LEVELS EXPLAINED:
-
ACTIA MULTI-DIAG COLLECTION 2009 2010 2011 2012 2013 2014 2015So, Long Story Short, what you Will Find Inside:1. Actia Multi-Diag I 2009 v.16.212. Actia Multi-Diag I 2010 v.19.103. Actia Multi-Diag III 2010 v.214. Actia Multi-Diag II 2011 v.23.07 + Vivid WorkShop5. Actia Multi-Diag III 2011 v.24.01 + Service Pack 3 v.24.316. Actia Multi-Diag I 2012 v.25.137. Actia Multi-Diag II 2012 v.26.08.1 + Service Pack 2 v.26.25 + Vivid WorkShop8. Actia Multi-Diag III 2012 v.27.06 + Service Pack 2 v.27.21 + Vivid WorkShop9. Actia Multi-Diag I 2013 v.27.31 + Vivid WorkShop10. Actia Multi-Diag II 2013 v.28.08 + Service Pack 1 v.28.1111. Actia Multi-Diag III 2013 v.29.04 + Service Pack 1 v.29.11 + Service Pack 2 v.29.2112. Actia Multi-Diag IV 2013 v.30.06 + Service Pack 1 v.30.11 + Service Pack 2 v.30.2113. Actia Multi-Diag I 2014 v.31.09 + Service Pack 1 v.31.11 + Service Pack 2 v.31.21 + Vivid WorkShop14. Actia Multi-Diag II 2014 v.32.05 + Service Pack 1 v.32.1115. Actia Multi-Diag I 2015 v33 + Service Pack 1 v.33.11 + Service Pack 2 v33.21 + Vivid WorkShop16. ALL keygens FROM TO V.33 v.19 [/ align]If you need Password for a file , it's like Always fantomel
-
MY VAG COLLECTION PART 11.Flash files for VAS-PC.Inside you will find:Seat flash files 2010-2014Skoda flash files 2009-2014Volksvagen flash files v69(2012)->v75(2013) and v78(04.2014)Bentley flash files 10.2013Audi flash files 2010-20142. VAS-PC 19.01.01 ENGLISH - program,patch, manual, how to flash, solution for expired date .... and brand files english:Lamborghini 09.2011 v19.12Bentley 05.2013 v19.10Seat 06.2013 v19.80Volkswagen 06.2013 v19.23Skoda 10.2013 v19.60Audi 10.2013 v19.50.023. ODIS ENGINEERING 5.0.14 - program,patch,install video,manual en, project files 2013_14_06 and flash files4. ODIS SERVICE 2.0.2 - program,patch, install video - postsetup 4.5.90 in part 2.5. 23.09.2014 - Added ODIS SERVICE 2.1.0 AND 2.1.1 WITHOUT PATCH6. 23.09.2014 - Added ODIS FLASH FILES 09.09.2014 from ERWIN ONLINE platform for BENTLEY,SKODA,SEAT7. 02.10.2014 - Added ODIS SERVICE 2.2.1 and 2.2.2 WITHOUT PATCH8. 02.10.2014 - Link to search for FLASH update available by part number inside erwin flash disks: HERE9. 29.10.2014 - ODIS ENGINEERING 6.0.9 WITHOUT PATCHMY VAG COLLECTION PART 210. 28.09.2014 - Added ODIS FLASH FILES 09.09.2014 from ERWIN ONLINE platform for BENTLEY,SKODA,SEAT, AUDI and VW11. 18.10.2014 - Postsetup 4.5.90 Unofficial for Odis 2.0.2 , D-PDU-API v.1.20.020 and ODIS DTS v.7.71.136 for those who don't have them after postsetup install.12. 02.11.2014 - Added VW Flash DVD v79 07.2014 that was missing in part 1 witch you can use with VAS PC or Odis Engineering.13. 04.11.2014 - Added TUTORIAL HOW TO FLASH WITH ODIS ENGINEERING because was requested inside thread.14. 05.11.2014 - Added ODIS FLASH FILES 23.10.2014 from ERWIN ONLINE platform for SKODA,SEAT, AUDI, VW15. 21.01.2015 - Added ODIS ENGINEERING 6.2.2 not cracked and new Project Files for ODIS-E v6.x 04.2014-12.201416. 24.01.2015 - Added ODIS SERVICE 6.2.3 not crackedMY VAG COLLECTION PART 317. 17.02.2015 - Added ODIS FLASH FILES 29.01.2015 from ERWIN ONLINE platform for SKODA,SEAT, AUDI and VW18. 17.03.2015 - Added ODIS ENGINEERING 6.2.2+POSTSETUP+PROJECTS+LAUNCHER+instructions19. 31.03.2015 - Added ODIS FLASH FILES 24.03.2015 from ERWIN ONLINE platform for SKODA,SEAT, AUDI and VOLKSWAGEN20. 14.05.2015 - Added ODIS FLASH FILES 28.04.2015 from ERWIN ONLINE platform for SKODA, AUDI and VOLKSWAGEN PART 1MY VAG COLLECTION PART 420. 14.05.2015 - Added ODIS FLASH FILES 28.04.2015 from ERWIN ONLINE platform for SEAT and BENTLEY21. 14.05.2015 - Cracked launchers for ODIS-S 2.2.3 & ODIS-E 6.2.2 (thanks to Mr Wolf)22. 14.05.2015 - Odis-S 2.2.3 & Postsetup 6.20.10 (password Aleksander)23. 14.05.2015 - ODIS-S 2.2.4 + POSTSETUP 6.50.0 + BT FIX + CRACKED LAUNCHER + LICENCE EU&RU all in a ISO with modified licences to get postsetup direct from iso if it's mounted into drive D made by me24. 23.08.2015 - ODIS-S 2.2.6 + POSTSETUP 6.70.0 + BT FIX + CRACKED LAUNCHER + LICENCE EU,RU&RO + HOW TO UPDATE FIRMWARE VAS5054A + HOW TO DISABLE UPDATE CHECK all in a ISO with modified licences to get postsetup direct from iso if it's mounted into drive D made by meI think like this it's a complete collection for anyone who has a VAS interface. All you need you will find inside.Enjoy.If you need a password for a file, like always it's fantomel
-
ODIS Service 2.2.5 Setup with license
PostSetup 6.50.0 here: LINKftp://212.62.78.225/ODIS/POSTSETUP/Postsetup_ODIS_Service_2_2_4.zip
-
Vcds Collection - Programs, Repairs, Dumps.....
в VCDS (он же Vag-Com)
Опубликовано
VCDS COLLECTION.txt