NBT EVO Carplay Fullscreen

[donjuan020 20]

Steps that i've done:

0. Write attached bin to a FAT32 stick and insert it into HU. Wait ~30seconds and then reboot the HU.
1. Enable SSH via script or ENET cable, depending on ilevel of HU(up to 18-07 can be enabled via USB BIN file)
2. Set laptop IP to 169.254.199.90 netmask 255.255.0.0 
3. Connect and login with putty via SSH protocol to 169.254.199.99
4. run command "vi /net/hu-omap/fs/sda1/opt/conn/carplay/carplay.ini"
5. edit with your display settings - i have 8.8' and have below configuration is working fine - you will find the settings on bottom of the file.
6. FDL code HU: HMI_39_39_128 to aktiv
7. Reboot twice as first time I got half of the display white.
8. Test and if everything is ok, take step 9
9. CLose SSH with tool32:
  -load NBTEVO.prg  -choose "steuern_routine"
  -type as Argument "ARG;TELNET_ZUGANG_AUS;STR"
OR with transmitter from esys - connect to ZGW and in ECU addr type 63.
send CAN ID commands: 31 01 A0 B0  and reboot the unit.

this is my working file

###############################################################################

[Screen]
UUID=e5f7a68d-7b0f-4305-984b-974f677a150b
Width=1280
Height=480
MaxFPS=60
PhysicalWidth=243
PhysicalHeight=78
LimitedUI=softKeyboard,softPhoneKeypad,nonMusicLists,musicLists,japanMaps
PPSServicePath=/pps/services/multimedia/renderer/control
NativeWindow=NO
WindowName=1280
VideoURL=screen:/any?winid=1280&nodstviewport=0&dstx=0&dsty=0&dstw=1280&dsth=480

UPD44044.BIN PUTTY.rar

[serygin 10]

и в чем суть?

[Top_nemec23 43]

Там кодингом можно если карплей уже есть. Если нет например мне проще код купить одноразовый

[sanja27 0]

perfect thank you, this is what i searched, have the same problem and only coding isnt working. 

I will try this. 

[YorikB 20]

Просто FDL кодирование.

Или купить код для Feature Installer для тех кто не кодирует

и активация карплея

и фул скрин

и снятие блокировок