-
Постов
181 -
Зарегистрирован
-
Посещение
-
Победитель дней
25
Активность репутации
-
Gallant получил реакцию от Ivaness в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
SPRINTER V21.12 под лицензию EOBD22.53
1. Summary
Added the radar sensor calibration function for the DISTRONIC system under chassis
447. Added the manual service reset function for the Instrument Panel system under the c
hassis 415. Added the initialization function for the TPMS system under chassis 639.
2. New Functions
1) Added the functions Read DTCs, Clear DTCs, Read Data Streams, and special functions for
the DISTRONIC system under chassis 447.
The special function is as follows:
Remote radar sensor calibration
2) Added actuation test and special functions for the Instrument Panel system under the chassis
415.
The special function is as follows:
Service function
3) Added the Initialization function for the TPMS system under chassis 639.
The initialization function is as follows:
Enter the new control unit via manual setting to perform test run.
3. Optimized Functions
None
4. Fixed Bugs
None
SPRINTER_V21.12_EOBD22.53.rar
-
Gallant получил реакцию от BMW_gg в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
SPRINTER V21.12 под лицензию EOBD22.53
1. Summary
Added the radar sensor calibration function for the DISTRONIC system under chassis
447. Added the manual service reset function for the Instrument Panel system under the c
hassis 415. Added the initialization function for the TPMS system under chassis 639.
2. New Functions
1) Added the functions Read DTCs, Clear DTCs, Read Data Streams, and special functions for
the DISTRONIC system under chassis 447.
The special function is as follows:
Remote radar sensor calibration
2) Added actuation test and special functions for the Instrument Panel system under the chassis
415.
The special function is as follows:
Service function
3) Added the Initialization function for the TPMS system under chassis 639.
The initialization function is as follows:
Enter the new control unit via manual setting to perform test run.
3. Optimized Functions
None
4. Fixed Bugs
None
SPRINTER_V21.12_EOBD22.53.rar
-
Gallant отреагировална пост adawa в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
Стоковые марки от 01.10.18
Сток 01.10.18 EN/RU/DE
-
Gallant получил реакцию от vitalets в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
RESETOIL V10.65 (RU) под лицензию EOBD22.53
1.Summary
Added the function Reset Service Lamp for HYUNDAI, KIA, BENZ, ROEWE, MG, PORSCHE, etc, and added
support for new model years. Optimized RENAULT, CITROEN, PEUGEOT, BJXD, YUEDA.
2.New Functions
01) HYNUDAI: optimized the function Reset Service Lamp; added support for HYUNDAI Elantra.
02) KIA: optimized the function Reset Service Lamp; added support for KIA K3.
03) BENZ: added the service lamp reset mode.
04) ROEWE: added support for i6 (IP31), ei6 (IP34), 360 (1.5L) (AP14NSE).
05) MG: added support for MG GS(EU), MG ZS(ZS11), ZS12, MG3 Zero 2013, NEW MG GS, MG 750.
06) PORSCHE: added the service function for cayenne(2018), panamera(2017-2018).
07) Added support for some domestic car models.
3.Optimized Functions
01) RENAULT: optimized the function Reset Service Lamp.
02) CITROEN: optimized the function Reset Service Lamp.
03) PEUGEOT: optimized the function Reset Service Lamp.
04) Beijing HYUNDAI, YUEDA KIA: Optimized the function Reset Service Lamp.
4.Fixed Problems
NULL
RESETOIL_V10.65_EOBD22.53.rar
-
Gallant получил реакцию от BMW_gg в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
RESETOIL V10.65 (RU) под лицензию EOBD22.53
1.Summary
Added the function Reset Service Lamp for HYUNDAI, KIA, BENZ, ROEWE, MG, PORSCHE, etc, and added
support for new model years. Optimized RENAULT, CITROEN, PEUGEOT, BJXD, YUEDA.
2.New Functions
01) HYNUDAI: optimized the function Reset Service Lamp; added support for HYUNDAI Elantra.
02) KIA: optimized the function Reset Service Lamp; added support for KIA K3.
03) BENZ: added the service lamp reset mode.
04) ROEWE: added support for i6 (IP31), ei6 (IP34), 360 (1.5L) (AP14NSE).
05) MG: added support for MG GS(EU), MG ZS(ZS11), ZS12, MG3 Zero 2013, NEW MG GS, MG 750.
06) PORSCHE: added the service function for cayenne(2018), panamera(2017-2018).
07) Added support for some domestic car models.
3.Optimized Functions
01) RENAULT: optimized the function Reset Service Lamp.
02) CITROEN: optimized the function Reset Service Lamp.
03) PEUGEOT: optimized the function Reset Service Lamp.
04) Beijing HYUNDAI, YUEDA KIA: Optimized the function Reset Service Lamp.
4.Fixed Problems
NULL
RESETOIL_V10.65_EOBD22.53.rar
-
Gallant получил реакцию от BMW_gg в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
надеюсь это ответ на ваш вопрос
-
Gallant получил реакцию от BMW_gg в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
SUZUKI V37.30 (RU) под лицензию EOBD22.53
What’s new
1. Summary
Fixed the problem about automatically search inaccessible.
2. New Functions None
3. Optimized Functions None
4. Fixed Bugs
Fixed the problem about automatically search inaccessible.
SUZUKI_V37.30_EOBD22.53.rar
-
Gallant получил реакцию от BMW_gg в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
GM V46.90 (RU) под лицензию EOBD22.53
What's new
1. Summary
Fixed the problem that the data stream show blank in some Actuation Test and Special function. Optimized the vehicle system select mode,the Freeze Frame function and some VIN Automatically Search function.
2. New functions
Nothing.
3. Optimized functions
1) Optimized the vehicle system select mode.
2) Optimized the Freeze Frame function.
3) Optimized some VIN Automatically Search function.
4. Fixed Bugs
1) Resolved the problem that the data stream show blank in some Actuation Test and Special Function in 2016 to 2018 Holden vehicle.
2) Resolved the problem that communication fail in Oil Reset Function in 2018
Holden Spark.
GM_V46.90_EOBD22.53.rar
-
Gallant получил реакцию от Diger_ в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
RESETOIL V10.65 (RU) под лицензию EOBD22.53
1.Summary
Added the function Reset Service Lamp for HYUNDAI, KIA, BENZ, ROEWE, MG, PORSCHE, etc, and added
support for new model years. Optimized RENAULT, CITROEN, PEUGEOT, BJXD, YUEDA.
2.New Functions
01) HYNUDAI: optimized the function Reset Service Lamp; added support for HYUNDAI Elantra.
02) KIA: optimized the function Reset Service Lamp; added support for KIA K3.
03) BENZ: added the service lamp reset mode.
04) ROEWE: added support for i6 (IP31), ei6 (IP34), 360 (1.5L) (AP14NSE).
05) MG: added support for MG GS(EU), MG ZS(ZS11), ZS12, MG3 Zero 2013, NEW MG GS, MG 750.
06) PORSCHE: added the service function for cayenne(2018), panamera(2017-2018).
07) Added support for some domestic car models.
3.Optimized Functions
01) RENAULT: optimized the function Reset Service Lamp.
02) CITROEN: optimized the function Reset Service Lamp.
03) PEUGEOT: optimized the function Reset Service Lamp.
04) Beijing HYUNDAI, YUEDA KIA: Optimized the function Reset Service Lamp.
4.Fixed Problems
NULL
RESETOIL_V10.65_EOBD22.53.rar
-
Gallant получил реакцию от mexannik в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
RESETOIL V10.65 (RU) под лицензию EOBD22.53
1.Summary
Added the function Reset Service Lamp for HYUNDAI, KIA, BENZ, ROEWE, MG, PORSCHE, etc, and added
support for new model years. Optimized RENAULT, CITROEN, PEUGEOT, BJXD, YUEDA.
2.New Functions
01) HYNUDAI: optimized the function Reset Service Lamp; added support for HYUNDAI Elantra.
02) KIA: optimized the function Reset Service Lamp; added support for KIA K3.
03) BENZ: added the service lamp reset mode.
04) ROEWE: added support for i6 (IP31), ei6 (IP34), 360 (1.5L) (AP14NSE).
05) MG: added support for MG GS(EU), MG ZS(ZS11), ZS12, MG3 Zero 2013, NEW MG GS, MG 750.
06) PORSCHE: added the service function for cayenne(2018), panamera(2017-2018).
07) Added support for some domestic car models.
3.Optimized Functions
01) RENAULT: optimized the function Reset Service Lamp.
02) CITROEN: optimized the function Reset Service Lamp.
03) PEUGEOT: optimized the function Reset Service Lamp.
04) Beijing HYUNDAI, YUEDA KIA: Optimized the function Reset Service Lamp.
4.Fixed Problems
NULL
RESETOIL_V10.65_EOBD22.53.rar
-
Gallant получил реакцию от Ecuador в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
надеюсь это ответ на ваш вопрос
-
Gallant отреагировална пост mexannik в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
владельцам Ниссана, версия 44.00, закинуть свой отлом (у меня там под 22.53, отлом с двумя файлами под свой серийник)
https://yadi.sk/d/fy1ECH9UaT5Kog
-
Gallant получил реакцию от vitalets в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
GM V46.90 (RU) под лицензию EOBD22.53
What's new
1. Summary
Fixed the problem that the data stream show blank in some Actuation Test and Special function. Optimized the vehicle system select mode,the Freeze Frame function and some VIN Automatically Search function.
2. New functions
Nothing.
3. Optimized functions
1) Optimized the vehicle system select mode.
2) Optimized the Freeze Frame function.
3) Optimized some VIN Automatically Search function.
4. Fixed Bugs
1) Resolved the problem that the data stream show blank in some Actuation Test and Special Function in 2016 to 2018 Holden vehicle.
2) Resolved the problem that communication fail in Oil Reset Function in 2018
Holden Spark.
GM_V46.90_EOBD22.53.rar
-
Gallant получил реакцию от vitalets в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
SUZUKI V37.30 (RU) под лицензию EOBD22.53
What’s new
1. Summary
Fixed the problem about automatically search inaccessible.
2. New Functions None
3. Optimized Functions None
4. Fixed Bugs
Fixed the problem about automatically search inaccessible.
SUZUKI_V37.30_EOBD22.53.rar
-
Gallant получил реакцию от Diger_ в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
SUZUKI V37.30 (RU) под лицензию EOBD22.53
What’s new
1. Summary
Fixed the problem about automatically search inaccessible.
2. New Functions None
3. Optimized Functions None
4. Fixed Bugs
Fixed the problem about automatically search inaccessible.
SUZUKI_V37.30_EOBD22.53.rar
-
Gallant получил реакцию от Ivaness в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
SUZUKI V37.30 (RU) под лицензию EOBD22.53
What’s new
1. Summary
Fixed the problem about automatically search inaccessible.
2. New Functions None
3. Optimized Functions None
4. Fixed Bugs
Fixed the problem about automatically search inaccessible.
SUZUKI_V37.30_EOBD22.53.rar
-
Gallant получил реакцию от kvvweb в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
SUZUKI V37.30 (RU) под лицензию EOBD22.53
What’s new
1. Summary
Fixed the problem about automatically search inaccessible.
2. New Functions None
3. Optimized Functions None
4. Fixed Bugs
Fixed the problem about automatically search inaccessible.
SUZUKI_V37.30_EOBD22.53.rar
-
Gallant получил реакцию от ev210 в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
SUZUKI V37.30 (RU) под лицензию EOBD22.53
What’s new
1. Summary
Fixed the problem about automatically search inaccessible.
2. New Functions None
3. Optimized Functions None
4. Fixed Bugs
Fixed the problem about automatically search inaccessible.
SUZUKI_V37.30_EOBD22.53.rar
-
Gallant получил реакцию от BMW_gg в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
BENZ V48.90 под лицензия EOBD22.53
1. New Functions
1) Added basic functions and actuation test for new IDs of the KG system under
chassis 205.
2) Added basic functions and actuation test for new IDs of the SCM system under
chassis 205.
3) Added basic functions and actuation test for new IDs of the REVETR-LF system
under chassis 205.
4) Added basic functions and actuation test for new IDs of the REVETR-RF system
under chassis 205.
5) Added basic functions and actuation test for new IDs of the SG-FOND system
under chassis 205.
6) Added actuation test, control unit matching, and ID data stream algorithm
for new IDs of the BMS system under chassis 205.
Control matching functions are as follows:
Coding
Coding data display
SCN display
CVN display
Learning process
Unlock high voltage component lock
High voltage component lock
7) Added basic functions, actuation test, and control unit matching for new IDs
of the ATA system under chassis 205.
Control matching functions are as follows:
Coding
Coding data display
8) Added basic functions, actuation test, and control unit matching for all IDs
of the SD system under chassis 205.
Control matching functions are as follows:
Learning process
Anti-pinch protection learning process
9) Added basic functions, actuation test, and control unit matching for all IDs
of the SG-LG system under chassis 205.
Control matching functions are as follows:
Coding
Coding data display
SCN display
CVN display
10) Added basic functions, actuation test, and control unit matching for all IDs of the SG-SOGE system under chassis 205.
Control matching functions are as follows:
Coding
Coding data display
11) Added basic functions for all IDs of the SRS system under chassis 205. 12) Added basic functions, actuation test, and control unit matching for new IDs of the Trailer-recognition system under chassis 205.
Control matching functions are as follows:
Learning process
Delete initialization value
13) Added basic functions and actuation test for new IDs of the Rear-SAM system
under chassis 205.
14) Added basic functions and actuation test for new IDs of the Driver-side-SAM
system under chassis 205.
15) Added basic functions, actuation test, and control unit matching for new IDs of the SG-SW_R system under chassis 205.
Control matching functions are as follows:
Test run control units
Test run installed control units
Coding
Coding data display
Learning process
Adaptation data
Input headlamp manufacture date
Runtime counter
Reset E2 (FR headlamp component) running hour counter
Reset E2e13 (right parking lamp, stop lamp, and daytime running lamp)
running hour counter
Reset E2m4 (FR lighting unit fan motor 1) running hour counter 16) Added basic functions, actuation test, and control unit matching for new IDs of the SG-SW_L system under chassis 205.
Control matching functions are as follows:
Test run control units
Test run installed control units
Coding
Coding data display
Learning process
Adaptation data
Input headlamp manufacture date
Calibration process
Zero position calibration
Runtime counter
Reset E1 (FL headlamp component) running hour counter
Reset E1e13 (left parking lamp, stop lamp, and daytime running lamp)
running hour counter
Reset E1m4 (FL lighting unit fan motor 1) running hour counter 17) Added basic functions and actuation test for new IDs of the DAB system under
chassis 205.
18) Added basic functions, actuation test, and control unit matching for all IDs of the IC system under chassis 205.
Control matching functions are as follows:
Manual setting
Current menu setting
Manufacturer default setting transfer
Oil grade factor
Customer-specific setting
Synchronize maintenance data
19) Added basic functions, actuation test, and control unit matching for new IDs of the DCU_RR system under chassis 205.
Control matching functions are as follows:
Learning process
Power window standardization
20) Added basic functions, actuation test, and control unit matching for new IDs of the ESA_Driver system under chassis 205.
Control matching functions are as follows:
Learning process
Standardization
21) Added basic functions, actuation test, and control unit matching for new IDs of the ESA_Front_passenger system under chassis 205.
Control matching functions are as follows:
Learning process
Standardization
22) Added basic functions, actuation test, and control unit matching for new IDs of the HKS system under chassis 205.
Control matching functions are as follows:
Learning process
M121/1 (trunk lid/lift door control unit)
23) Added basic functions, actuation test, and control unit matching for new IDs of the DCU_LF system under chassis 205.
Control matching functions are as follows:
Learning process
Power window standardization
24) Added basic functions, actuation test, and control unit matching for new IDs of the DCU_LR system under chassis 205.
Control matching functions are as follows:
Learning process
Power window standardization
25) Added basic functions, actuation test, and control unit matching for new IDs of the DCU_RF system under chassis 205.
Control matching functions are as follows:
Learning process
Power window standardization
26) Added basic functions, actuation test, and control unit matching for all IDs of the AAC system under chassis 205.
Control matching functions are as follows:
Configuration
Adopt factory settings
Learning process
Actuation motor learning
Servo motor standardization
Refrigerant compressor starts running
27) Added basic functions and actuation test for all IDs of the ALWR system under
chassis 463.
28) Added actuation test and control unit matching for new IDs of the IC system
under chassis 222.
29) Added actuation test for the ESP system under chassis 213.
30) Added basic functions for the TV system under chassis 166ML, 166GL, 176, 246.
31) Added basic functions for the PTCU system under chassis 176 and 246.
32) Added actuation test for the ucp system under chassis 164.
33) Added actuation test for the sam-f system under chassis 164.
34) Added actuation test for the Airbag system under chassis 164.
35) Added the level regulation function for the ADS suspension system under
chassis 213.
Control matching functions are as follows:
Teach-in processes
Level calibration
36) Added the throttle matching function for three gasoline engine systems under
chassis 213.
Control matching functions are as follows:
Teach-in processes
Teach in of throttle valve stop
37) Optimized the menu tree configuration under chassis 253,217,222,292,190. 38) Added the initialization function for the driver's seat regulation system
under chassis 219\164\171\251\209,211,463,203.
39) Added actuation test and matching function for the Gasoline Engine system
under chassis 156.
Matching functions are as follows:
Configuration
Coding
SCN display
CVN display
Car model verification number display
Manual setting
Injector injection quantity adjustment
Learning process
Activation of fuel pump
Teach in of throttle valve stop
Teach-in positions for camshafts
Resetting of adaptation values
Teach-in of exhaust gas recirculation actuator
Teaching in the ethanol proportion in the fuel
Resetting reading of frequency counter for ethanol teach-in
processes
40) Added four data streams for the EPS system under chassis 176/246.
41) Added control module for the Gearbox system under chassis 166M.
42) Added control module for the ESP system under chassis 166GL.
43) Added control module for the CBC (power distribution system) under chassis 166GL.
44) Added control module for the RVC (roll bar soft-top control system) under
chassis 217/205.
45) Added control module for the Door system under chassis 205.
46) Added control module for the SG-AWF – vehicle distance warning function
control unit under chassis 156\190.
47) Added control module for the ESP system under chassis 156.
48) Added actuation test for the Diesel Engine system under chassis 245.
49) Added special functions for the TPM system under chassis 245/169.
Special functions:
1.Write wheel electronics identification number.
50) Added basic functions and actuation test for new IDs of the ICM system under
chassis 245/169.
51) Added special functions and coding for the ASSYST system under chassis 245/169.
Special functions:
ASSYST settings
Coding
Coding
52) Added actuation test for the PTS system under chassis 245/169.
A44/1(PTS warning display,instrument panel driver side)
A44/3(Rear PTS warning display)
53) Added special functions for the ESP system under chassis 245/169.
Special functions:
Hill Start Assit(Activating)
54) Added the coding function for the AAC system under chassis 169 (As of 12/2005)/245 (As of 12/2005).
55) Added basic functions, actuation test, and control unit matching for the TPM system under chassis 253.
Control matching functions are as follows:
Write identification numbers of tire pressure sensors
56) Added basic functions and control unit matching for the chassis 156, 176, 246.
Control matching functions are as follows:
Resetting of learned values of component ‘Y68/3(All-wheel drive solenoid
valve)’
57). Added basic functions and actuation test for the KAB system under chassis 253.
58) Added basic functions, actuation test, and control unit matching for the RFK system under chassis 156.
Control matching functions are as follows: Calibration of steering angle sensor
Calibration of reversing camera
59). Optimized basic functions for the IRS-HLA system under chassis 156, 190.
60) Optimized basic functions for the SG-AWF system under chassis 156, 190. 61) Optimized basic functions for the FSCU system under chassis 190. 62) Added basic functions, actuation test, and control unit matching for the FSCU system under chassis 156, 292.
Control matching functions are as follows:
Display of SCN
63) Optimized basic functions and actuation test for the ESP system under chassis 190.
64) Added actuation test for the VG system under chassis 164, X164. 65) Added actuation test and control unit matching for the Suspension system
under chassis 164, X164, 251.
Control matching functions are as follows:
Pneumatic test of component A9/1 (AIRmatic compressor unit) Pneumatic test of component Left front level control valve
Pneumatic test of component Right front level control valve
Pneumatic test of component Left rear level control valve
Pneumatic test of component Right rear level control valve
Pneumatic test of component AIRmatic central reservoir charge valve
Pneumatic test of component AIRmatic pressure release valve
Pneumatic test of component Leakage test between compressor and valve block Pneumatic test of component Leakage test between valve block and suspension
struts
Pneumatic test of componentLeakage test between valve block and central
reservoir
66) Added control unit matching for the Suspension system under chassis 251, 211.
Control matching functions are as follows:
Pneumatic test of component A9/1 (AIRmatic compressor unit)
67) Added control unit matching for the ISM system under chassis 164, X164, 251, 216, 221.
Control matching functions are as follows:
Delete coding
Perform calibration
68) Added basic functions, actuation test, and control unit matching for the ISM system under chassis 216, 221.
Control matching functions are as follows:
Perform calibration.
Detach the transport protection of control module ISM, personalize or
activate the control module.
Reset parameter Variant coding.
69) Added basic functions, actuation test, and control unit matching for the ISM system under chassis 164, X164, 251.
Control matching functions are as follows:
Perform calibration.
Detach the transport protection of control module ISM, personalize or
activate the control module.
Reset parameter Variant coding
70) Added actuation test for the HAQ system under chassis 164, X164.
71) Added control unit matching for the DTR system under chassis 221, 216. 72) Added control unit matching and initialization function for the DTR system
under chassis 221, 216, 164, 251.
Control matching functions are as follows:
Sensor calibration
73) Added basic functions and actuation test for the IRS-HLA system under chassis 164.
74) Added basic functions and actuation test for the NAVI system under chassis 164/251/203/209/245/463.
75) Added basic functions and actuation test for the Gearbox system under chassis 164.
76) Added basic functions and actuation test for the TEL system under chassis 211/215/220/230/240.
77) Added basic functions for the SDAR system under chassis 164, X164, 251, 245, 171, 203, 209, 211, 219, 215, 220, 230, 240, 463.
78) Added basic functions, actuation test, and control unit matching for the CTEL system under chassis 164, 251, 245, 169, 203, 209.
79) Added basic functions and actuation test for the VCS system under chassis
164, X164, 251, 245, 171, 203, 209, 211, 219, 215, 220, 230, 240, 463, 169. 80) Added basic functions, control unit matching, initialization for the GPS
system under chassis 171, 211, 219, 215, 220, 240.
Control matching functions are as follows:
Write VIN (vehicle identification number)
81) Added basic functions and control unit matching for the CDC system under
chassis 164, X164, 251, 169, 245, 171, 203, 209, 211, 219, 215, 220, 230, 463.
Control matching functions are as follows:
Restart of optical ring
82) Added basic functions, actuation test, and coding for the AGW system under
chassis 164, X164, 251, 169, 245, 171, 203, 209, 211, 219, 215, 220, 230, 240, 463.
83) Added basic functions and coding for the MB-portal system under chassis 171 203 211 219 215 220 230, 240.
84) Added basic functions, actuation test, control unit matching, and coding
for the NAVI system under chassis 171 203 211 219 215 220 230, 240.
Control matching functions are as follows:
Restart of optical ring
85) Added basic functions and coding for the CTEL system under chassis 164 X164 251 169 245 171 203 209 211 219 215 220 230 240 463.
86) Added basic functions, actuation test, control unit matching, coding, and
initialization for the E-CALL system under chassis 211, 215, 220, 230, 240.
Control matching functions are as follows:
Restart of optical ring
WriteVIN
2. Optimized Functions
None
3. Fixed Bugs
87) Modified actuation test for the TPM system under chassis 245/169. Test of signal transmission between A69/1(left front tire pressure sensor)
and N88(Tire pressure monitor control unit)
Test of signal transmission between A69/2(right front tire pressure sensor)
and N88(Tire pressure monitor control unit)
Test of signal transmission between A69/3(left rear tire pressure sensor)
and N88(Tire pressure monitor control unit)
Test of signal transmission between A69/4(rear right tire pressure sensor)
and N88(Tire pressure monitor control unit)
88) Modified special functions for the ICM system under chassis 245/169.
Configuration for key 3
Customer-specific settings
89) Modified special functions for the PTS system under chassis 245/169.
Special functions
Vehicle version
90) Added special functions for the AAC system under chassis 169 (As of 12/2005) /245 (As of 12/2005).
Special functions:
Teach-in of actuator motors after actuator motor replacement
Breaking-in procedure after replacement of refrigerant compressor
BENZ_V48.90_EOBD22.53.rar
-
Gallant получил реакцию от Ivaness в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
BENZ V48.90 под лицензия EOBD22.53
1. New Functions
1) Added basic functions and actuation test for new IDs of the KG system under
chassis 205.
2) Added basic functions and actuation test for new IDs of the SCM system under
chassis 205.
3) Added basic functions and actuation test for new IDs of the REVETR-LF system
under chassis 205.
4) Added basic functions and actuation test for new IDs of the REVETR-RF system
under chassis 205.
5) Added basic functions and actuation test for new IDs of the SG-FOND system
under chassis 205.
6) Added actuation test, control unit matching, and ID data stream algorithm
for new IDs of the BMS system under chassis 205.
Control matching functions are as follows:
Coding
Coding data display
SCN display
CVN display
Learning process
Unlock high voltage component lock
High voltage component lock
7) Added basic functions, actuation test, and control unit matching for new IDs
of the ATA system under chassis 205.
Control matching functions are as follows:
Coding
Coding data display
8) Added basic functions, actuation test, and control unit matching for all IDs
of the SD system under chassis 205.
Control matching functions are as follows:
Learning process
Anti-pinch protection learning process
9) Added basic functions, actuation test, and control unit matching for all IDs
of the SG-LG system under chassis 205.
Control matching functions are as follows:
Coding
Coding data display
SCN display
CVN display
10) Added basic functions, actuation test, and control unit matching for all IDs of the SG-SOGE system under chassis 205.
Control matching functions are as follows:
Coding
Coding data display
11) Added basic functions for all IDs of the SRS system under chassis 205. 12) Added basic functions, actuation test, and control unit matching for new IDs of the Trailer-recognition system under chassis 205.
Control matching functions are as follows:
Learning process
Delete initialization value
13) Added basic functions and actuation test for new IDs of the Rear-SAM system
under chassis 205.
14) Added basic functions and actuation test for new IDs of the Driver-side-SAM
system under chassis 205.
15) Added basic functions, actuation test, and control unit matching for new IDs of the SG-SW_R system under chassis 205.
Control matching functions are as follows:
Test run control units
Test run installed control units
Coding
Coding data display
Learning process
Adaptation data
Input headlamp manufacture date
Runtime counter
Reset E2 (FR headlamp component) running hour counter
Reset E2e13 (right parking lamp, stop lamp, and daytime running lamp)
running hour counter
Reset E2m4 (FR lighting unit fan motor 1) running hour counter 16) Added basic functions, actuation test, and control unit matching for new IDs of the SG-SW_L system under chassis 205.
Control matching functions are as follows:
Test run control units
Test run installed control units
Coding
Coding data display
Learning process
Adaptation data
Input headlamp manufacture date
Calibration process
Zero position calibration
Runtime counter
Reset E1 (FL headlamp component) running hour counter
Reset E1e13 (left parking lamp, stop lamp, and daytime running lamp)
running hour counter
Reset E1m4 (FL lighting unit fan motor 1) running hour counter 17) Added basic functions and actuation test for new IDs of the DAB system under
chassis 205.
18) Added basic functions, actuation test, and control unit matching for all IDs of the IC system under chassis 205.
Control matching functions are as follows:
Manual setting
Current menu setting
Manufacturer default setting transfer
Oil grade factor
Customer-specific setting
Synchronize maintenance data
19) Added basic functions, actuation test, and control unit matching for new IDs of the DCU_RR system under chassis 205.
Control matching functions are as follows:
Learning process
Power window standardization
20) Added basic functions, actuation test, and control unit matching for new IDs of the ESA_Driver system under chassis 205.
Control matching functions are as follows:
Learning process
Standardization
21) Added basic functions, actuation test, and control unit matching for new IDs of the ESA_Front_passenger system under chassis 205.
Control matching functions are as follows:
Learning process
Standardization
22) Added basic functions, actuation test, and control unit matching for new IDs of the HKS system under chassis 205.
Control matching functions are as follows:
Learning process
M121/1 (trunk lid/lift door control unit)
23) Added basic functions, actuation test, and control unit matching for new IDs of the DCU_LF system under chassis 205.
Control matching functions are as follows:
Learning process
Power window standardization
24) Added basic functions, actuation test, and control unit matching for new IDs of the DCU_LR system under chassis 205.
Control matching functions are as follows:
Learning process
Power window standardization
25) Added basic functions, actuation test, and control unit matching for new IDs of the DCU_RF system under chassis 205.
Control matching functions are as follows:
Learning process
Power window standardization
26) Added basic functions, actuation test, and control unit matching for all IDs of the AAC system under chassis 205.
Control matching functions are as follows:
Configuration
Adopt factory settings
Learning process
Actuation motor learning
Servo motor standardization
Refrigerant compressor starts running
27) Added basic functions and actuation test for all IDs of the ALWR system under
chassis 463.
28) Added actuation test and control unit matching for new IDs of the IC system
under chassis 222.
29) Added actuation test for the ESP system under chassis 213.
30) Added basic functions for the TV system under chassis 166ML, 166GL, 176, 246.
31) Added basic functions for the PTCU system under chassis 176 and 246.
32) Added actuation test for the ucp system under chassis 164.
33) Added actuation test for the sam-f system under chassis 164.
34) Added actuation test for the Airbag system under chassis 164.
35) Added the level regulation function for the ADS suspension system under
chassis 213.
Control matching functions are as follows:
Teach-in processes
Level calibration
36) Added the throttle matching function for three gasoline engine systems under
chassis 213.
Control matching functions are as follows:
Teach-in processes
Teach in of throttle valve stop
37) Optimized the menu tree configuration under chassis 253,217,222,292,190. 38) Added the initialization function for the driver's seat regulation system
under chassis 219\164\171\251\209,211,463,203.
39) Added actuation test and matching function for the Gasoline Engine system
under chassis 156.
Matching functions are as follows:
Configuration
Coding
SCN display
CVN display
Car model verification number display
Manual setting
Injector injection quantity adjustment
Learning process
Activation of fuel pump
Teach in of throttle valve stop
Teach-in positions for camshafts
Resetting of adaptation values
Teach-in of exhaust gas recirculation actuator
Teaching in the ethanol proportion in the fuel
Resetting reading of frequency counter for ethanol teach-in
processes
40) Added four data streams for the EPS system under chassis 176/246.
41) Added control module for the Gearbox system under chassis 166M.
42) Added control module for the ESP system under chassis 166GL.
43) Added control module for the CBC (power distribution system) under chassis 166GL.
44) Added control module for the RVC (roll bar soft-top control system) under
chassis 217/205.
45) Added control module for the Door system under chassis 205.
46) Added control module for the SG-AWF – vehicle distance warning function
control unit under chassis 156\190.
47) Added control module for the ESP system under chassis 156.
48) Added actuation test for the Diesel Engine system under chassis 245.
49) Added special functions for the TPM system under chassis 245/169.
Special functions:
1.Write wheel electronics identification number.
50) Added basic functions and actuation test for new IDs of the ICM system under
chassis 245/169.
51) Added special functions and coding for the ASSYST system under chassis 245/169.
Special functions:
ASSYST settings
Coding
Coding
52) Added actuation test for the PTS system under chassis 245/169.
A44/1(PTS warning display,instrument panel driver side)
A44/3(Rear PTS warning display)
53) Added special functions for the ESP system under chassis 245/169.
Special functions:
Hill Start Assit(Activating)
54) Added the coding function for the AAC system under chassis 169 (As of 12/2005)/245 (As of 12/2005).
55) Added basic functions, actuation test, and control unit matching for the TPM system under chassis 253.
Control matching functions are as follows:
Write identification numbers of tire pressure sensors
56) Added basic functions and control unit matching for the chassis 156, 176, 246.
Control matching functions are as follows:
Resetting of learned values of component ‘Y68/3(All-wheel drive solenoid
valve)’
57). Added basic functions and actuation test for the KAB system under chassis 253.
58) Added basic functions, actuation test, and control unit matching for the RFK system under chassis 156.
Control matching functions are as follows: Calibration of steering angle sensor
Calibration of reversing camera
59). Optimized basic functions for the IRS-HLA system under chassis 156, 190.
60) Optimized basic functions for the SG-AWF system under chassis 156, 190. 61) Optimized basic functions for the FSCU system under chassis 190. 62) Added basic functions, actuation test, and control unit matching for the FSCU system under chassis 156, 292.
Control matching functions are as follows:
Display of SCN
63) Optimized basic functions and actuation test for the ESP system under chassis 190.
64) Added actuation test for the VG system under chassis 164, X164. 65) Added actuation test and control unit matching for the Suspension system
under chassis 164, X164, 251.
Control matching functions are as follows:
Pneumatic test of component A9/1 (AIRmatic compressor unit) Pneumatic test of component Left front level control valve
Pneumatic test of component Right front level control valve
Pneumatic test of component Left rear level control valve
Pneumatic test of component Right rear level control valve
Pneumatic test of component AIRmatic central reservoir charge valve
Pneumatic test of component AIRmatic pressure release valve
Pneumatic test of component Leakage test between compressor and valve block Pneumatic test of component Leakage test between valve block and suspension
struts
Pneumatic test of componentLeakage test between valve block and central
reservoir
66) Added control unit matching for the Suspension system under chassis 251, 211.
Control matching functions are as follows:
Pneumatic test of component A9/1 (AIRmatic compressor unit)
67) Added control unit matching for the ISM system under chassis 164, X164, 251, 216, 221.
Control matching functions are as follows:
Delete coding
Perform calibration
68) Added basic functions, actuation test, and control unit matching for the ISM system under chassis 216, 221.
Control matching functions are as follows:
Perform calibration.
Detach the transport protection of control module ISM, personalize or
activate the control module.
Reset parameter Variant coding.
69) Added basic functions, actuation test, and control unit matching for the ISM system under chassis 164, X164, 251.
Control matching functions are as follows:
Perform calibration.
Detach the transport protection of control module ISM, personalize or
activate the control module.
Reset parameter Variant coding
70) Added actuation test for the HAQ system under chassis 164, X164.
71) Added control unit matching for the DTR system under chassis 221, 216. 72) Added control unit matching and initialization function for the DTR system
under chassis 221, 216, 164, 251.
Control matching functions are as follows:
Sensor calibration
73) Added basic functions and actuation test for the IRS-HLA system under chassis 164.
74) Added basic functions and actuation test for the NAVI system under chassis 164/251/203/209/245/463.
75) Added basic functions and actuation test for the Gearbox system under chassis 164.
76) Added basic functions and actuation test for the TEL system under chassis 211/215/220/230/240.
77) Added basic functions for the SDAR system under chassis 164, X164, 251, 245, 171, 203, 209, 211, 219, 215, 220, 230, 240, 463.
78) Added basic functions, actuation test, and control unit matching for the CTEL system under chassis 164, 251, 245, 169, 203, 209.
79) Added basic functions and actuation test for the VCS system under chassis
164, X164, 251, 245, 171, 203, 209, 211, 219, 215, 220, 230, 240, 463, 169. 80) Added basic functions, control unit matching, initialization for the GPS
system under chassis 171, 211, 219, 215, 220, 240.
Control matching functions are as follows:
Write VIN (vehicle identification number)
81) Added basic functions and control unit matching for the CDC system under
chassis 164, X164, 251, 169, 245, 171, 203, 209, 211, 219, 215, 220, 230, 463.
Control matching functions are as follows:
Restart of optical ring
82) Added basic functions, actuation test, and coding for the AGW system under
chassis 164, X164, 251, 169, 245, 171, 203, 209, 211, 219, 215, 220, 230, 240, 463.
83) Added basic functions and coding for the MB-portal system under chassis 171 203 211 219 215 220 230, 240.
84) Added basic functions, actuation test, control unit matching, and coding
for the NAVI system under chassis 171 203 211 219 215 220 230, 240.
Control matching functions are as follows:
Restart of optical ring
85) Added basic functions and coding for the CTEL system under chassis 164 X164 251 169 245 171 203 209 211 219 215 220 230 240 463.
86) Added basic functions, actuation test, control unit matching, coding, and
initialization for the E-CALL system under chassis 211, 215, 220, 230, 240.
Control matching functions are as follows:
Restart of optical ring
WriteVIN
2. Optimized Functions
None
3. Fixed Bugs
87) Modified actuation test for the TPM system under chassis 245/169. Test of signal transmission between A69/1(left front tire pressure sensor)
and N88(Tire pressure monitor control unit)
Test of signal transmission between A69/2(right front tire pressure sensor)
and N88(Tire pressure monitor control unit)
Test of signal transmission between A69/3(left rear tire pressure sensor)
and N88(Tire pressure monitor control unit)
Test of signal transmission between A69/4(rear right tire pressure sensor)
and N88(Tire pressure monitor control unit)
88) Modified special functions for the ICM system under chassis 245/169.
Configuration for key 3
Customer-specific settings
89) Modified special functions for the PTS system under chassis 245/169.
Special functions
Vehicle version
90) Added special functions for the AAC system under chassis 169 (As of 12/2005) /245 (As of 12/2005).
Special functions:
Teach-in of actuator motors after actuator motor replacement
Breaking-in procedure after replacement of refrigerant compressor
BENZ_V48.90_EOBD22.53.rar
-
Gallant отреагировална пост mexannik в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
Скопируй string из values в values.ru
-
Gallant получил реакцию от Magadan69 в Руководство по ремонту Mercedes Benz ML класса (W164) 2005-2011 бензин / дизель
попробуйте опять )
-
Gallant получил реакцию от kasper-dp в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
HYUNDAI V50.40 (RU) под лицензию EOBD22.53
Compared with the previous version:
1.new functions
The basic functions and special functions of 2017-2018models such as
Accent(HC)/Creta(GSR)/Genesis(DH)/i40(VF)/Santafe(DMI)/Verna(RBI)
in the general area are added.
2.optimized functions
none.
3.fixed bugs
none.
HYUNDAI_V50.40_EOBD22.53.rar
-
Gallant получил реакцию от fricker123 в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
HYUNDAI V50.40 (RU) под лицензию EOBD22.53
Compared with the previous version:
1.new functions
The basic functions and special functions of 2017-2018models such as
Accent(HC)/Creta(GSR)/Genesis(DH)/i40(VF)/Santafe(DMI)/Verna(RBI)
in the general area are added.
2.optimized functions
none.
3.fixed bugs
none.
HYUNDAI_V50.40_EOBD22.53.rar
-
Gallant получил реакцию от BMW_gg в Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).
HYUNDAI V50.40 (RU) под лицензию EOBD22.53
Compared with the previous version:
1.new functions
The basic functions and special functions of 2017-2018models such as
Accent(HC)/Creta(GSR)/Genesis(DH)/i40(VF)/Santafe(DMI)/Verna(RBI)
in the general area are added.
2.optimized functions
none.
3.fixed bugs
none.
HYUNDAI_V50.40_EOBD22.53.rar