Help In Reading MQB ELV 5Q0905861A D70F3624

[mohamed osama 0]

hey guys

i have similar problem to read 5Q0 905 861 A but i have Abrites AVDI with v850/rh850 programmer 

avdi support immo 4 ELVs but i need to read that elv i tried to connect it properly with no result 

even when i selected 3371 i have d flash and p flash but they are not complete i can say the Pflash is ok but the Dflash is not the .bin file is full of FF FF FF ....

so what can we do to read that elv safely with avdi?

[григории 501]

проверить паику или другим программатором считать

[mohamed osama 0]

6 годин назад, григории сказав:

check the solder or use another programmer to calculate

i found that topic here and i make sure the wiring is fine ?

is there any programmer can get P/D flash of 3624 with boot pins and with out MCU removal ?

[grandmater 20]

3624 and 3371 are essentially the same processor. If you read the codeflash with your AVDI, then the connection is correct. Use a normal programmer, something is wrong with your AVDI.

[mohamed osama 0]

23 години назад, grandmater сказав:

3624 and 3371 are essentially the same processor. If you read the codeflash with your AVDI, then the connection is correct. Use a normal programmer, something is wrong with your AVDI.

avdi is fine no problem i read immo 5 in selection of immo 4 due to its the same MCU 

which programmer you recommed that can read this fine with out mcu removal ?