Kia sportage 2021

[Nightdriver 4]

Hi to all

A customer called to restore kia sportage 2021 u.s.a , he went to another place to do mileage correction and as per cutomer the guy was using small black tablet connected to obd2 port , i figured out its that chinese obdstar , after finishing the job his cluster converted to km instead of miles, 4wd light on, speed pointer little up , the guy disconnect and re-connect battery but nothing changed, also the adjustment not correct , customer want to restore the cluster and do mileage correction properly.
No backup file there as well.

Would anyone suggest from where to start bcz i think the data is corrupted.

Attached cluster before and after modification

Thanks in advance

[metz 501]

Hi. You need the number that is pasted on the cluster itself or a dump of EEPROM read by some tool, preferably a programmer with parsing

Только что, metz сказал:

Привіт. Тобі потрібен номер, який вставлений на сам кластер, або дамп EEPROM, зчитаний якоюсь утилітою, бажано програматором з функцією парсингу.

Hi. You need the number that is pasted on the cluster itself or a dump of EEPROM read by some tool, preferably a programmer 

[Dmitriy79 311]

 Теперь нужно править конфигурации приборной панели . Если не сохранился дамп приборки . Есть чем вычитать приборку ?

2 минуты назад, metz сказал:

Hi. You need the number that is pasted on the cluster itself or a dump of EEPROM read by some tool, preferably a programmer with parsing

Hi. You need the number that is pasted on the cluster itself or a dump of EEPROM read by some tool, preferably a programmer 

Нужен еепром!

[Nightdriver 4]

20 хвилин назад, metz сказав:

Hi. You need the number that is pasted on the cluster itself or a dump of EEPROM read by some tool, preferably a programmer with parsing

Hi. You need the number that is pasted on the cluster itself or a dump of EEPROM read by some tool, preferably a programmer 

i asked the customer to bring the car, i can easily read the cluster id no with STool, i have my doubts that this chinese obdstar read and write the wrong mcu, therefore data is corrupted, i have tool can read and write mcu on bench which i can tell it would be R7F701403 

24 хвилини назад, Dmitriy79 сказав:

 Now you need to edit the dashboard configuration. If the dashboard dump has not been saved. Do you have something to read the dashboard with?

We need EEPROM!

i thought about that , ie using stool eol configuration to adjust the file , but i think the file is corrupted and we need to restore on bench , no backup file was saved, i asked customer to bring the car

24 хвилини назад, Dmitriy79 сказав:

 Now you need to edit the dashboard configuration. If the dashboard dump has not been saved. Do you have something to read the dashboard with?

We need EEPROM!

i thought about that , ie using stool eol configuration to adjust the file , but i think the file is corrupted and we need to restore on bench , no backup file was saved, i asked customer to bring the car

[Dmitriy79 311]

Нужен дамп приборки и номер приборной доски .