44 - Steering Assist] [Coding-II - 11] or if that function is not available then use [sec.Access - 16] instead Enter 40168, to enable the basic setting. [Do it!] [basic Settings - 04] Group 060 [Go!] Activate the Basic Setting. [ON/OFF/Next] After a successful basic setting, field 1 should say "OK". [Done, Go Back] To make sure the basic setting was successful, check the sensor again. [Measuring Blocks - 08] Group 007 [Go!] Check field 1, the value has to be between -1.5 and +1.5 °. [Done, Go Back] [Close Controller, Go Back - 06