x-prog 6.17

[Djamel Eddine 2]

Кто успел скачать, поделитесь в личку версией 6.17, на попробывать.

[REX-XX 123]

тоже не отказался бы

[Nik Makken 80]

Может я что-то упустил))

где Вы такое видели, если речь идет о прошивке без донгла? или софт нужен?

 

[Djamel Eddine 2]

У меня 5,55.
У меня вектра PSG16.
вам нужен аутентификация-0029.
6.17 нужна.
заключение flah+EEprom+soft

[volvomafia 197]

А смысл с софта?Вы хотите перешить китальянский с 5.5 на 6.17?

[Djamel Eddine 2]

Auth-0029 может быть открыт и подтвержден полностью MPC555

[Djamel Eddine 2]

В 9/2/2024 в 3:18 PM, REX-XX сказав:

тоже не отказался бы

Bootloader 1.2 and 1.4 can be updated on versions of Xprog 5.0 to xprog 6.17
You just have to check
1.Bootlader
2.Firmware
3.Build
4.Link

the version is just 5.0 -5.55- 5.84-6.12-6.17 etc..

the Build remains I think it is with DONGLE and without DONGLE
also There is DB9 old USB and New USB

 

Щойно, Djamel Eddine сказав:

Bootloader 1.2 and 1.4 can be updated on versions of Xprog 5.0 to xprog 6.17
You just have to check
1.Bootlader
2.Firmware
3.Build
4.Link

the version is just 5.0 -5.55- 5.84-6.12-6.17 etc..

the Build remains I think it is with DONGLE and without DONGLE
also There is DB9 old USB and New USB

 

If someone wants🙂

he can read the Firmware of his Xprog 6.17 without Dongle
with USBASP or other interface to save for any useful purpose.

Compress the firmware and software to keep the original.

To confirm this backup another Xprog is necessary to fah with this backup

If someone loses their xprog while flashing
after being overwritten, just force a new flashing and repeat until recovery

[Leks 17]

you wrote: "If someone wants🙂

he can read the Firmware of his Xprog 6.17 without Dongle
with USBASP or other interface to save for any useful purpose."

How can I do this?

I managed to decrypt the update of version 6.17. But there is not enough EEPROM data to write to atmega64. EEPROM version 5.84 is not suitable for 6.17.

[Djamel Eddine 2]

23 години назад, Leks сказав:

vous avez écrit: "Si quelqu'un veut🙂

il peut lire le Firmware de son Xprog 6.17 sans Dongle
avec USBASP ou d'une autre interface pour enregistrer pour toute fin utile."

Comment puis-je faire cela?

J'ai réussi à déchiffrer la mise à jour de la version 6.17. Mais il n'y a pas assez de mémoire EEPROM de données à écrire dans atmega64. EEPROM version 5.84 n'est pas adapté pour 6.17.

QUEL TYPE DE EEPROM LE 6.17 , 

merci 

[Leks 17]

EEPROM is a data space for Atmega64, not a command space. Datasheet p.21:

"The ATmega64 contains 2 Kbytes of data EEPROM memory. It is organized as a separate data space, in which single bytes can be read and written. The EEPROM has an endurance of at least 100,000 write/erase cycles. The access between the EEPROM and the CPU is described in the following, specifying the EEPROM Address Registers, the EEPROM Data Register, and the EEPROM Control Register."