overs0ull

I have this kess cd version but is too big to send it on the email . If you want i can upload it i mega and you can download it ? Regards

if you kess is reworked and have the right firmware inside you can read almost everything and is safety , But for delphy 3.7 batter is ktag

You can make safe coding via tech 2 win and not problem You can make safe coding via tech 2 win and not problem

you can easy remove it with vcds or odis ingeenering and all is for 5 min . The speed limiter is in the flash mate . Read the flash post it here and we will remove it

better to use xprog box 4.48 cause work pretty stable and more good from 5.51

thanks for the scripts

if you can start the x prog and get with screen you will need to reflash it with new software (firmware) or you udpate or trying to update is not goo well and need to reflash it again

thanks for the info . You need for edc15 to desolder the eeprom and read it by programmer , or if it with 29f400 or 800 you can read it via obd , or on the bench in boot mode with ground of pin 23 in the eeprom this is look perfect mate is it for psg 16