fantomel

MY VCDS COLLECTION Here you have my vcds collection, all without password.These are gathered from friends,forums and own know how. What can you find inside: 1. All eproms that i could find for 11.11.0->12.12.0 to mention vers.5 eeprom only for bm/bl vers.6 eeprom 256bits for RL-BM AND BL CHIPS with software from FOLDER 12.12.0 AND HAS INTERNET PROTECTION 2. Firmware 1.84 and 1.92 3. As said by forum members pictures with best quality VCDS clone interfaces 4. All genuine installers from 11.11.0->14.10.0 5. All china installers with loaders(cracks) 11.11.3->12.12.0 6. All HQ Clone Software that i could find from different sources even by doing updates from genuine HQ installers in english and german language. 7. All needed programs in different versions to recover your intefaces with tutorials and fuse bits for old and new bootloader. VCDS COLLECTION.txt

OP-COM 131223c + 150406b DB 2015 + OcFlash for HQ Clone Modified OP-COM 131223c with 150406b database from 2015 for HQ OP-COM Clone. Also program for firmware update. Keep in mind that 2015 version works with firmware 1.64 but in pack last firmware is 1.60. OP-COM_131223c+150406b+OcFlash_HQ_EN.txt OP-COM_150406b_EN.pdf

Op-Com firmware 1.33 to 1.60 + ocflash + ocflash pro OcFlash+OcFlashPro+Firmware 1.33to1.60.rar

CDP+ Delphi Autocom Firmware Recovery,OTP Area,Firmwares So i was thinking these days to make a full pack at day regarding the the firmware our CDP+ interfaces. As you all know we can flash our interface SAFE only inside Delphi 2012.3 (last version without clone blacklist) or in these days inside WOW (no matter what version). We (at least me) prefer to write the firmware with WOW because like this i can use wow and delphi-autocom without problems since WOW writes some extra bits that delphi-autocom does not detect but wow does. Story short, what will you find inside this pack: 1. Mprog 3.5 and ept file for CDP+ (never seen one that has this problem) 2. How to recover your CDP+ from a bad flash or red lights problem via USB. 3. How to read your firmware with a ST-Link device via CDP+ J400 connector and also pinout of STLink to J400 4. How to read the OTP (One Time Programming) area responsable for the serial number of your interface - BE CAREFUL . This area can be modified only by incrementing the actual serial number in the already written ST chip or you can write any number in a new one if you know how. 5. Flash Loader Demonstrator v2.6.0 to restore your firmware via USB 6. STM32 ST-Link Utility v3.4.0 to read firmware and otp and if you are willing to risk to change them. 6. OTP area for CDP+ Clone 100251 bin file. 7. Firmware from programs: 1321 from WOW ;1331 from delphi, autocom, wow; 1410 from WOW, 1422 from Delphi and 1423 from Autocom. 8. Firmware recovery to flash your CDP+ interface in case of upgrade or bad flash: a) Old ones already on web:2012.2; 2012.3; 2013.1; 2013.2.1; 2013.2.2; 2013.3. My flash files written to CDP+ by WOW and read via ST-Link saved as .bin,.hex,.s19,.srec from my clone CDP+ FOR RECOVERY 2013.3 - Firmware 1331 2014.1 - Firmware 1410 2014.2 - Firmware 1422 from Delphi 2014.2 - Firmware 1423 from Autocom 9. 24.12.2014 Firmware 1430 from Autocom 2014 R3 2.14.3 10. 24.12.2014 New pack with RECOVERY FIRMWARE 1430 .bin,.hex,.s19,.srec included and all from 1->9 If you find something wrong or to add to this pack please write. All you need to play with your CDP+ interface it's a ST-Link V2 Programmer CLONE like these HERE or the Original. If you need a password for a file, like always it's fantomel 11. - 12.04.2015 - Added to MY COLLECTION for CDP and CDP+ Firmware 1513 from AUTOCOM 2015 R1 2.15.1 12. - 12.04.2015 - Added MY COLLECTION for CDP and CDP+ where you will find all above + Complete Install kits to Delphi and Autocom 2013.3 , All my WOW 4 and 5 Collection, All Genuine Kits of 2014 and also The mixed 2014.1 Version with 2 patches(one already present in main archive and another one separated) - a little late but i forgot to post this also here. 13. - 20.04.2015 - Added to MY COLLECTION for CDP and CDP+ Firmware 1424 and 1430 from Wurth Group for WOW and W.EASY 14. - 07.05.2015 - Added to MY COLLECTION for CDP and CDP+ Firmware 1515 from Wurth Group for WOW and W.EASY CDP+ Recovery, OTP Area, Firmwares NEW.txt MY CDP AND CDP+ COLLECTION.txt

Since i have seen that ppl try to use newer op-com versions to their china cloned interface and a lot of them have bricked them i have made a tutorial on how to restore it by USB and not with a programmer. Remember this is for PIC MCU not for FTDI chip (that can be flashed with MPROG). If you like my post and it helped you please press THANKS. REPAIR ERASED OP-COM CLONE BOOTLOADER.txt OcFlash+OcFlashPro+Firmware 1.33to1.60.rar

Database is 3.38 , logo 3.40

I wanted 2.07 or 2.09 if you have to play a little. Do you still have them? Я хотел 2,07 или 2,09, если у вас есть, чтобы играть немного. Вы до сих пор их?

You are welcome, confirmed it's working on Windows 7 and Windows 8 by other users. Вы можете подтвердил, что он работает на Windows 7 и Windows 8 от других пользователей.

you have there program already done for you. No need to write hex if you are on 0475 and you can use regular fix that you have already in case of problems. Diver for interface it's inside program after install. P.S. Disable antivirus because v54 for 0475 is VMProtect packed.

FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386 What you can find here: 1.For tool number 0386: ept file,fix file,hex dump and 2 versions of programs V54 used for it, the one from china and the AES November software. 2.For tool number 0475: ept file,fix file, hex dumps made from my tool and program V54 for it that does not need time back. 3.For both tools you have here how to connect to it, how to read firmware movie, how to write dump that you wish. Reading and writing the mcu for this tool can be done with old Philips LPC 2000 software and USB-TTL adapter, preferd the one that uses PL2303 chipset. You need also a jumper in position to do that. If you want to check CRP level of your NXP LPC2119 mcu you can do that with FlashMagic and USB-TTL adapter. CRP LEVELS EXPLAINED: GALLETTO COMPLETE FANTOMEL.txt

ACTIA MULTI-DIAG COLLECTION 2009 2010 2011 2012 2013 2014 2015 So, Long Story Short, what you Will Find Inside: 1. Actia Multi-Diag I 2009 v.16.21 2. Actia Multi-Diag I 2010 v.19.10 3. Actia Multi-Diag III 2010 v.21 4. Actia Multi-Diag II 2011 v.23.07 + Vivid WorkShop 5. Actia Multi-Diag III 2011 v.24.01 + Service Pack 3 v.24.31 6. Actia Multi-Diag I 2012 v.25.13 7. Actia Multi-Diag II 2012 v.26.08.1 + Service Pack 2 v.26.25 + Vivid WorkShop 8. Actia Multi-Diag III 2012 v.27.06 + Service Pack 2 v.27.21 + Vivid WorkShop 9. Actia Multi-Diag I 2013 v.27.31 + Vivid WorkShop 10. Actia Multi-Diag II 2013 v.28.08 + Service Pack 1 v.28.11 11. Actia Multi-Diag III 2013 v.29.04 + Service Pack 1 v.29.11 + Service Pack 2 v.29.21 12. Actia Multi-Diag IV 2013 v.30.06 + Service Pack 1 v.30.11 + Service Pack 2 v.30.21 13. Actia Multi-Diag I 2014 v.31.09 + Service Pack 1 v.31.11 + Service Pack 2 v.31.21 + Vivid WorkShop 14. Actia Multi-Diag II 2014 v.32.05 + Service Pack 1 v.32.11 15. Actia Multi-Diag I 2015 v33 + Service Pack 1 v.33.11 + Service Pack 2 v33.21 + Vivid WorkShop 16. ALL keygens FROM TO V.33 v.19 [/ align] If you need Password for a file , it's like Always fantomel MY ACTIA MULTI-DIAG COLLECTION.txt

MY VAG COLLECTION PART 1 1.Flash files for VAS-PC. Inside you will find: Seat flash files 2010-2014 Skoda flash files 2009-2014 Volksvagen flash files v69(2012)->v75(2013) and v78(04.2014) Bentley flash files 10.2013 Audi flash files 2010-2014 2. VAS-PC 19.01.01 ENGLISH - program,patch, manual, how to flash, solution for expired date .... and brand files english: Lamborghini 09.2011 v19.12 Bentley 05.2013 v19.10 Seat 06.2013 v19.80 Volkswagen 06.2013 v19.23 Skoda 10.2013 v19.60 Audi 10.2013 v19.50.02 3. ODIS ENGINEERING 5.0.14 - program,patch,install video,manual en, project files 2013_14_06 and flash files 4. ODIS SERVICE 2.0.2 - program,patch, install video - postsetup 4.5.90 in part 2. 5. 23.09.2014 - Added ODIS SERVICE 2.1.0 AND 2.1.1 WITHOUT PATCH 6. 23.09.2014 - Added ODIS FLASH FILES 09.09.2014 from ERWIN ONLINE platform for BENTLEY,SKODA,SEAT 7. 02.10.2014 - Added ODIS SERVICE 2.2.1 and 2.2.2 WITHOUT PATCH 8. 02.10.2014 - Link to search for FLASH update available by part number inside erwin flash disks: HERE 9. 29.10.2014 - ODIS ENGINEERING 6.0.9 WITHOUT PATCH MY VAG COLLECTION PART 2 10. 28.09.2014 - Added ODIS FLASH FILES 09.09.2014 from ERWIN ONLINE platform for BENTLEY,SKODA,SEAT, AUDI and VW 11. 18.10.2014 - Postsetup 4.5.90 Unofficial for Odis 2.0.2 , D-PDU-API v.1.20.020 and ODIS DTS v.7.71.136 for those who don't have them after postsetup install. 12. 02.11.2014 - Added VW Flash DVD v79 07.2014 that was missing in part 1 witch you can use with VAS PC or Odis Engineering. 13. 04.11.2014 - Added TUTORIAL HOW TO FLASH WITH ODIS ENGINEERING because was requested inside thread. 14. 05.11.2014 - Added ODIS FLASH FILES 23.10.2014 from ERWIN ONLINE platform for SKODA,SEAT, AUDI, VW 15. 21.01.2015 - Added ODIS ENGINEERING 6.2.2 not cracked and new Project Files for ODIS-E v6.x 04.2014-12.2014 16. 24.01.2015 - Added ODIS SERVICE 6.2.3 not cracked MY VAG COLLECTION PART 3 17. 17.02.2015 - Added ODIS FLASH FILES 29.01.2015 from ERWIN ONLINE platform for SKODA,SEAT, AUDI and VW 18. 17.03.2015 - Added ODIS ENGINEERING 6.2.2+POSTSETUP+PROJECTS+LAUNCHER+instructions 19. 31.03.2015 - Added ODIS FLASH FILES 24.03.2015 from ERWIN ONLINE platform for SKODA,SEAT, AUDI and VOLKSWAGEN 20. 14.05.2015 - Added ODIS FLASH FILES 28.04.2015 from ERWIN ONLINE platform for SKODA, AUDI and VOLKSWAGEN PART 1 MY VAG COLLECTION PART 4 20. 14.05.2015 - Added ODIS FLASH FILES 28.04.2015 from ERWIN ONLINE platform for SEAT and BENTLEY 21. 14.05.2015 - Cracked launchers for ODIS-S 2.2.3 & ODIS-E 6.2.2 (thanks to Mr Wolf) 22. 14.05.2015 - Odis-S 2.2.3 & Postsetup 6.20.10 (password Aleksander) 23. 14.05.2015 - ODIS-S 2.2.4 + POSTSETUP 6.50.0 + BT FIX + CRACKED LAUNCHER + LICENCE EU&RU all in a ISO with modified licences to get postsetup direct from iso if it's mounted into drive D made by me 24. 23.08.2015 - ODIS-S 2.2.6 + POSTSETUP 6.70.0 + BT FIX + CRACKED LAUNCHER + LICENCE EU,RU&RO + HOW TO UPDATE FIRMWARE VAS5054A + HOW TO DISABLE UPDATE CHECK all in a ISO with modified licences to get postsetup direct from iso if it's mounted into drive D made by me I think like this it's a complete collection for anyone who has a VAS interface. All you need you will find inside. Enjoy. If you need a password for a file, like always it's fantomel FANTOMEL'S VAG COLLECTION.txt

ODIS Service 2.2.5 Setup with license PostSetup 6.50.0 here: LINKftp://212.62.78.225/ODIS/POSTSETUP/Postsetup_ODIS_Service_2_2_4.zip ODIS 2.2.5.rar

Alex77761 Ссылки для 2,09 мертвы.