Jeep Liberty

[sergeykr]

Привет всем. Авто 

Jeep Liberty 2007 г. Мкпп дв. 2,4 л. 170 л.с внезапно пропало управление стартером. На прямую , на втягивающее все крутит, с ключа тишина. Нужна помощь, пните в нужную сторону, спасибо

[FootM]

Была недавно такая.

При МКПП смотреть концевик сцепления.

Вот от дилеров. 

Ignition Switch

² Visually inspect ignition switch for indications of physical damage and loose or corroded wire harness connections.

Clean corroded connections as required. Refer to Wiring Diagrams. Refer to Ignition Switch and Key

Lock Cylinder for ignition switch service procedures.

8F - 52 STARTING SYSTEM KJ

Clutch Pedal Position Switch

² If vehicle is equipped with a manual transmission, visually inspect clutch pedal position switch for indications of

physical damage and loose or corroded wire harness connections. Clean corroded connections as required.

Refer to Clutch Hydraulic Linkage for clutch pedal position switch service procedures.

Park/Neutral Position Switch

² If vehicle is equipped with an automatic transmission, visually inspect park/neutral position switch for indications

of physical damage and loose or corroded wire harness connections. Clean corroded connections as

required. Refer to Park/Neutral Position Switch for park/neutral position switch service procedures.

Starter Relay

² Visually inspect starter relay for indications of physical damage and loose or corroded wire harness connections.

Clean corroded connections as required. Refer to Starter Relay for starter relay service procedures.

Starter Motor

² Visually inspect starter motor for indications of physical damage and loose or corroded wire harness connections.

Clean corroded connections as required. If problem being diagnosed involves improper starter engagement,

disengagement or noise complaints, starter motor should be removed. With starter motor removed,

inspect starter pinion and ring gears for damaged or missing teeth. Replace faulty components as required.

Refer to Starter Motor for removal/installation procedures.

Starter Solenoid

² Visually inspect starter solenoid for indications of physical damage and loose or corroded wire harness connections.

Clean corroded connections as required. Refer to Starter Motor for starter solenoid service procedures.

Wiring

² Visually inspect starting system wire harnesses for indications of physical damage. Repair or replace any faulty

wiring, as required. Refer to Wiring Diagrams for repair or connector and terminal service procedures.

 

 

 

во вложении страница 2150

Jeep Liberty KJ FSM 2006.rar

[sergeykr]

спасибо за ответ, но концевик проверили, в норме. при нажатии замыкается на коротко