Привет всем. Пробую читать по JTAG через J-link.
Проц: OMAP5948ZXZ
- Connecting ...
- Connected successfully
- 1 of 512 sectors selected, 1 range, 0x3F60000 - 0x3F7FFFF
- Start of determining flash info (Bank 0 @ 0x00000000)
- End of determining flash info
- Flash bank info:
- 512 * 128 KB @ 0x00000000
- Start of preparing flash programming
- TotalIRLen = ?, IRPrint = 0x..FFFFFFFFFFFC1444031F3D81
- RESET (pin 15) high, but should be low. Please check target hardware.
- TotalIRLen = ?, IRPrint = 0x..FFFFFFFFFFFC1444031F3D81
- ERROR: Failed to download RAMCode.
- ERROR: Failed to prepare for programming.
Failed to download RAMCode!
- End of preparing flash programming
- Start of restoring
- End of restoring
- ERROR: Failed to read back target memory
Disconnecting ...
- Disconnected
Коннект проходит, но читать не получается. Как будто флешка заблокирована.
Подскажите может кто сталкивался. Спасибо!