Cgraenge

Hello, I urgently need to disable the following errors codes: P0585 P0593 P0733 P1790 P0562 attached is the boot read file. (I read/write using kessv3) i hope someone can help me! NGC3_boot_udlæs.mpc

If anyone else can help, please write. its very urgent 🚨 car still wont start, only first time and shuts off. i really hope someone can help me disable the error codes, and corrigate checksum.

Can you upload to the Dropbox, I can’t download on here

Yes, and I need to flash the ecu with the DTC-OFF file. can you fix the errors? These are the fault codes I’m trying to disable: P0585 P0593 P0733 P1790 P0562

Files is uploaded to my Dropbox here: https://www.dropbox.com/scl/fo/y8t6anqnz2z40xq8fbaqf/AIkmVKlkDfKJi1UJpgwsvYk?rlkey=3vdjzs4c08na069umur7ioom0&st=yp6ehpa6&dl=0 please let me know if there’s any problems with link or anything thank you!! Ori read file, and DTC OFF file (the one I need fixed) SVEDIT_DTC OFF_NGC3_boot_udlæs.bin NGC3_boot_udlæs.mpc SVEDIT_DTC OFF_NGC3_boot_udlæs.bin NGC3_boot_udlæs.mpc

Hello, can someone please help me fix checksum error on NGC3, premapped ecu - for dodge ram. i made DTC off with SVEDIT, but it makes checksum error, starts 1st time and won’t start after.

Will send dm

Hello, Im trying to remove some fault codes from an ecu, when ecu is flashed - car starts once, shuts off and cannot start. its a checksum error. im reading/writing with kessv3, I made DTC-off (removed error codes) with SVEDIT. Can anyone help fix the checksum error? thank you!