OBD2 Simulator

[cbakan]

OBD2 Simulator kit , circuit schematic , pcb  and dump of MCU are attached. 

it's from famous electronic magazine Elektor.. it has 2 protocols (iso and PWM) by selecting dip switches , 

 

Enjoy it

 

 

 

 

080804-11.zip 080804-PCB.pdf UK2010060181.pdf

[dr.rimz]

Можно немного пояснить для чего можно применить?

[rahimovv]

спасибо

[cbakan]

20 часов назад, dr.rimz сказал:

Can you explain a little what you can use?

hi ;

You can use this simulator for testing OBD2 diagnostic tools, make paractice for developing programs etc..

here is the  some specs;

Four predefined protocols:

- KWP2000 Fast Init

- KWP2000 Slow Init (5-Baud Init)

- ISO9141-2

- PWM J-1850

Protocol selection using DIL switches, Four predefined error codes,Up to 15 configurable error codes

•Sensor data for speed and rev count adjustable by potentiometer

-          MIL generation by pushbutton

-           Connect’ and active ‘MIL’ indicators

-           Freeze frames store sensor data when MIL is generated

you can look at the picture below

http://