Cdp+ Delphi Autocom Firmware Recovery, Otp Area, Firmwares

[fantomel]

CDP+ Delphi Autocom Firmware Recovery,OTP Area,Firmwares

 

So i was thinking these days to make a full pack at day regarding the the firmware our CDP+ interfaces.

As you all know we can flash our interface SAFE only inside Delphi 2012.3 (last version without clone blacklist) or in these days inside WOW (no matter what version).

We (at least me) prefer to write the firmware with WOW because like this i can use wow and delphi-autocom without problems since WOW writes some extra bits that delphi-autocom does not detect but wow does.

 

Story short, what will you find inside this pack:

1. Mprog 3.5 and ept file for CDP+ (never seen one that has this problem)

2. How to recover your CDP+ from a bad flash or red lights problem via USB.

3. How to read your firmware with a ST-Link device via CDP+ J400 connector and also pinout of STLink to J400

4. How to read the OTP (One Time Programming) area responsable for the serial number of your interface - BE CAREFUL . This area can be modified only by incrementing the actual serial number in the already written ST chip or you can write any number in a new one if you know how.

5. Flash Loader Demonstrator v2.6.0 to restore your firmware via USB

6. STM32 ST-Link Utility v3.4.0 to read firmware and otp and if you are willing to risk to change them.

6. OTP area for CDP+ Clone 100251 bin file.

7. Firmware from programs: 1321 from WOW ;1331 from delphi, autocom, wow; 1410 from WOW, 1422 from Delphi and 1423 from Autocom.

8. Firmware recovery to flash your CDP+ interface in case of upgrade or bad flash:

a) Old ones already on web:2012.2; 2012.3; 2013.1; 2013.2.1; 2013.2.2; 2013.3.

My flash files written to CDP+ by WOW and read via ST-Link saved as .bin,.hex,.s19,.srec from my clone CDP+ FOR RECOVERY

2013.3 - Firmware 1331

2014.1 - Firmware 1410

2014.2 - Firmware 1422 from Delphi

2014.2 - Firmware 1423 from Autocom

9. 24.12.2014 Firmware 1430 from Autocom 2014 R3 2.14.3

 

10. 24.12.2014 New pack with RECOVERY FIRMWARE 1430 .bin,.hex,.s19,.srec included and all from 1->9

 

If you find something wrong or to add to this pack please write.

 

All you need to play with your CDP+ interface it's a ST-Link V2 Programmer CLONE like these HERE or the Original.

 

If you need a password for a file, like always it's fantomel

 

11. - 12.04.2015 - Added to MY COLLECTION for CDP and CDP+ Firmware 1513 from AUTOCOM 2015 R1 2.15.1

 

12. - 12.04.2015 - Added MY COLLECTION for CDP and CDP+ where you will find all above + Complete Install kits to Delphi and Autocom 2013.3 , All my WOW 4 and 5 Collection, All Genuine Kits of 2014 and also The mixed 2014.1 Version with 2 patches(one already present in main archive and another one separated) - a little late but i forgot to post this also here.

 

13. - 20.04.2015 - Added to MY COLLECTION for CDP and CDP+ Firmware 1424 and 1430 from Wurth Group for WOW and W.EASY

 

14. - 07.05.2015 - Added to MY COLLECTION for CDP and CDP+ Firmware 1515 from Wurth Group for WOW and W.EASY

CDP+ Recovery, OTP Area, Firmwares NEW.txt

MY CDP AND CDP+ COLLECTION.txt

[kot567]

Where I can find this pack ?

[evgenijm]

3 часа назад, kot567 сказал:

Where I can find this pack ?

Смотри и пользуйся

autocom.txt

[kot567]

В 30.06.2017 в 08:56, evgenijm сказал:

Смотри и пользуйся

autocom.txt

Thx mate!