Перейти к содержанию

Renault, Dacia, Opel airbag with SPC560P50 processors crash


Emperor.kbs

Рекомендуемые сообщения

Renault, Dacia, Opel airbag with SPC560P50 processors crash

JLINK%20mod%20to%20enable%20VCC%20from%2

1 / Connect J-Link to USB and start the program J-Flash

2 / Load the SPC560P50.jflash project file and set the properties as in the pictures:

jlink%201Water.jpg

jlink%202Water.jpg

jlink%203Water.jpg

3 / Weld the wires J-Link to the Renault SRS module as in the picture:

Renault%20Dacia%20JLINK%20pinoutWater.jp

4 / Connect the external power supply + 12V and GND to the sensor

5 / Connect the J-link programming connector to J-link.

6 / Make a backup: read and save all processor data (with all selected sectors). Select "Target" ⇨ "Replay" ⇨ "Selected Sectors"

jlink%204Water.jpg

7 / Read and save the SPC560P50 data flash (address 0x800000-0x80FFFF) in .bin format. (The file should be 64KB)

8 / Download this file to our online crash cleaner and delete it.

9 / Load the deleted file in the J-Flash program, select the starting address "800000", select "Target" ⇨ "Program & Check".

 

Ссылка на комментарий
Поделиться на другие сайты

  • _____ закрыл тема
Гость
Эта тема закрыта для публикации ответов.
  • Последние посетители   0 пользователей онлайн

    • Ни одного зарегистрированного пользователя не просматривает данную страницу
×
×
  • Создать...