Перейти к содержанию

Активация всех марок машин для EasyDiag. Пошаговая инструкция. Часть вторая (Бесплатно).


Рекомендуемые сообщения

25 минут назад, Renegat24 сказал:

Да после каждого удаления кэш чистил и планшет пере гружал. Оболочку скачивал с этой здесь. Какие правила при добавлении разных версий марок, какие файлы нужно добавлять какие нет, может кто сталкивался с этой оболочкой?

Конкретно по DEMO, не могу объяснить, но у меня, если один раз выдала dissacording, то запускается только после удаления папки V15.04, очистки кэша и данных и вставки новой папки...

Ссылка на комментарий
Поделиться на другие сайты

связка андроид 4  прога с марками на флешке Diagzone PRO V1.00.005 и марки 22.53 дружить не будут? толька 5 анрюша и выше?

Ссылка на комментарий
Поделиться на другие сайты

8 часов назад, Renegat24 сказал:

 

Если Вы знаете о проблеме этой оболочки не могли бы вы более подробно расказать как ей пользоваться?

в этой оболочке проблем незамечено! 4 месяца!

android 7 blackview bv7000pro  как с 11.57 так и с 11.65 66 еще не прошивал

марки были декабрь 2017 и июнь 2018

Ссылка на комментарий
Поделиться на другие сайты

25 минут назад, межгород сказал:

в этой оболочке проблем незамечено! 4 месяца!

Значит нужно хотябы до 5 андроида обновится и пробовать дальше.

У Вас во всех марках несколько различных вариантов марок или только в одной? В папку с марками копируется только папки с релизом марки и один значек марки или чтото еще нужно копировать?

32 минуты назад, межгород сказал:

в этой оболочке проблем незамечено! 4 месяца!

У меня версия 11,60 может в этом проблема?

Ссылка на комментарий
Поделиться на другие сайты

На 2-х  разныз планшетах на андрюше 4.4.х проблем с выбором нескольких марок у меня нету!

И в оболочке диагзоне 007, и диагун сдмод....

 

Ссылка на комментарий
Поделиться на другие сайты

1 минуту назад, SHARP сказал:

На 2-х  разныз планшетах на андрюше 4.4.х проблем с выбором нескольких марок у меня нету!

Можете выложить свою оболочку на тороний ресурс или в личку. Может в моей оболочке всетаки проблема.

Ссылка на комментарий
Поделиться на другие сайты

В 25.09.2018 в 20:23, algirdassg сказал:

BENZ 49.02 EN/RU;.....

Вложенные папки (BIN, CODINGLIB, и т.д. пустые).

Ссылка на комментарий
Поделиться на другие сайты

BENZ 49.02 EN/RU; MAXUS 10.05 EN; DEMO 15,04 EN/RU ; EOBD2 22.62 EN/RU; MARUTI 14.08 EN; VW28.46 EN/RU. под EOBD2 22.53 большое спасибо,bemo ,запустил,остальное пока не пробовал

 

 

Ссылка на комментарий
Поделиться на другие сайты

1 час назад, algirdassg сказал:

Перезакачать не пробовали, или winrar обновить? Так как там всё на месте

Попробовал. BIN, CODINGLIB, и т.д. пустые 

 

BENZ.JPG

Ссылка на комментарий
Поделиться на другие сайты

BENZ V48.90 под лицензия EOBD22.53

1. New Functions

1)     Added basic functions and actuation test for new IDs of the KG system under

chassis 205.

2)     Added basic functions and actuation test for new IDs of the SCM system under

chassis 205.

3)     Added basic functions and actuation test for new IDs of the REVETR-LF system

under chassis 205.

4)     Added basic functions and actuation test for new IDs of the REVETR-RF system

under chassis 205.

5)     Added basic functions and actuation test for new IDs of the SG-FOND system

under chassis 205.

6)     Added actuation test, control unit matching, and ID data stream algorithm

for new IDs of the BMS system under chassis 205.

Control matching functions are as follows:

  Coding

    Coding data display

    SCN display

    CVN display

Learning process

 Unlock high voltage component lock

    High voltage component lock

7)     Added basic functions, actuation test, and control unit matching for new IDs

of the ATA system under chassis 205.

Control matching functions are as follows:

  Coding

    Coding data display

8)     Added basic functions, actuation test, and control unit matching for all IDs

of the SD system under chassis 205.

Control matching functions are as follows:

  Learning process

    Anti-pinch protection learning process

9)     Added basic functions, actuation test, and control unit matching for all IDs

of the SG-LG system under chassis 205.

Control matching functions are as follows:

  Coding

    Coding data display

    SCN display

    CVN display

10) Added basic functions, actuation test, and control unit matching for all IDs of the SG-SOGE system under chassis 205.

Control matching functions are as follows:

  Coding

    Coding data display

11) Added basic functions for all IDs of the SRS system under chassis 205. 12) Added basic functions, actuation test, and control unit matching for new IDs of the Trailer-recognition system under chassis 205.

Control matching functions are as follows:

  Learning process

    Delete initialization value

13)    Added basic functions and actuation test for new IDs of the Rear-SAM system

under chassis 205.

14)    Added basic functions and actuation test for new IDs of the Driver-side-SAM

system under chassis 205.

15)    Added basic functions, actuation test, and control unit matching for new IDs of the SG-SW_R system under chassis 205.

Control matching functions are as follows:

  Test run control units

    Test run installed control units

  Coding

    Coding data display

  Learning process

    Adaptation data

      Input headlamp manufacture date

    Runtime counter

      Reset E2 (FR headlamp component) running hour counter

      Reset E2e13 (right parking lamp, stop lamp, and daytime running lamp)

running hour counter

      Reset E2m4 (FR lighting unit fan motor 1) running hour counter 16) Added basic functions, actuation test, and control unit matching for new IDs of the SG-SW_L system under chassis 205.

Control matching functions are as follows:

  Test run control units

    Test run installed control units

  Coding

    Coding data display

  Learning process

    Adaptation data

      Input headlamp manufacture date

    Calibration process

  Zero position calibration

    Runtime counter

      Reset E1 (FL headlamp component) running hour counter

      Reset E1e13 (left parking lamp, stop lamp, and daytime running lamp)

running hour counter

      Reset E1m4 (FL lighting unit fan motor 1) running hour counter 17) Added basic functions and actuation test for new IDs of the DAB system under

chassis 205.

18)     Added basic functions, actuation test, and control unit matching for all IDs of the IC system under chassis 205.

Control matching functions are as follows:

  Manual setting

    Current menu setting

    Manufacturer default setting transfer

Oil grade factor

Customer-specific setting

    Synchronize maintenance data

19)     Added basic functions, actuation test, and control unit matching for new IDs of the DCU_RR system under chassis 205.

Control matching functions are as follows:

  Learning process

    Power window standardization

20)     Added basic functions, actuation test, and control unit matching for new IDs of the ESA_Driver system under chassis 205.

Control matching functions are as follows:

  Learning process

Standardization

21)     Added basic functions, actuation test, and control unit matching for new IDs of the ESA_Front_passenger system under chassis 205.

Control matching functions are as follows:

  Learning process

    Standardization

22)     Added basic functions, actuation test, and control unit matching for new IDs of the HKS system under chassis 205.

Control matching functions are as follows:

  Learning process

    M121/1 (trunk lid/lift door control unit)

23)     Added basic functions, actuation test, and control unit matching for new IDs of the DCU_LF system under chassis 205.

Control matching functions are as follows:

  Learning process

Power window standardization

24)     Added basic functions, actuation test, and control unit matching for new IDs of the DCU_LR system under chassis 205.

Control matching functions are as follows:

  Learning process

    Power window standardization

25)     Added basic functions, actuation test, and control unit matching for new IDs of the DCU_RF system under chassis 205.

Control matching functions are as follows:

  Learning process

    Power window standardization

26)     Added basic functions, actuation test, and control unit matching for all IDs of the AAC system under chassis 205.

Control matching functions are as follows:

  Configuration

    Adopt factory settings

Learning process

    Actuation motor learning

    Servo motor standardization

    Refrigerant compressor starts running

27)     Added basic functions and actuation test for all IDs of the ALWR system under

chassis 463.

28)     Added actuation test and control unit matching for new IDs of the IC system

under chassis 222.

29)     Added actuation test for the ESP system under chassis 213.

30)     Added basic functions for the TV system under chassis 166ML, 166GL, 176, 246.

31)     Added basic functions for the PTCU system under chassis 176 and 246.

32)     Added actuation test for the ucp system under chassis 164.

 

33)     Added actuation test for the sam-f system under chassis 164.

34)     Added actuation test for the Airbag system under chassis 164.

 

35)     Added the level regulation function for the ADS suspension system under

chassis 213.

 Control matching functions are as follows:

 Teach-in processes

  Level calibration

36)     Added the throttle matching function for three gasoline engine systems under

chassis 213.

Control matching functions are as follows:

 Teach-in processes

  Teach in of throttle valve stop

37)     Optimized the menu tree configuration under chassis 253,217,222,292,190. 38) Added the initialization function for the driver's seat regulation system

under chassis 219\164\171\251\209,211,463,203.

39) Added actuation test and matching function for the Gasoline Engine system

under chassis 156.

Matching functions are as follows:

Configuration

Coding

SCN display

CVN display

Car model verification number display

Manual setting

              Injector injection quantity adjustment

Learning process

Activation of fuel pump

Teach in of throttle valve stop

Teach-in positions for camshafts

Resetting of adaptation values

Teach-in of exhaust gas recirculation actuator

Teaching in the ethanol proportion in the fuel

Resetting reading of frequency counter for ethanol teach-in

processes

40)     Added four data streams for the EPS system under chassis 176/246.

41)     Added control module for the Gearbox system under chassis 166M.

42)     Added control module for the ESP system under chassis 166GL.

43)     Added control module for the CBC (power distribution system) under chassis 166GL.

44)     Added control module for the RVC (roll bar soft-top control system) under

chassis 217/205.

45)     Added control module for the Door system under chassis 205.

46)     Added control module for the SG-AWF – vehicle distance warning function

control unit under chassis 156\190.

47)     Added control module for the ESP system under chassis 156.

48)     Added actuation test for the Diesel Engine system under chassis 245.

49)     Added special functions for the TPM system under chassis 245/169.

       Special functions:

         1.Write wheel electronics identification number.

50)     Added basic functions and actuation test for new IDs of the ICM system under

chassis 245/169.

51)     Added special functions and coding for the ASSYST system under chassis 245/169.

  Special functions:

       ASSYST settings

     Coding

       Coding

52)     Added actuation test for the PTS system under chassis 245/169.

       A44/1(PTS warning display,instrument panel driver side)

       A44/3(Rear PTS warning display)

53)     Added special functions for the ESP system under chassis 245/169.

     Special functions:

      Hill Start Assit(Activating)

54)     Added the coding function for the AAC system under chassis 169 (As of 12/2005)/245 (As of 12/2005).

55)     Added basic functions, actuation test, and control unit matching for the TPM system under chassis 253.

Control matching functions are as follows:

  Write identification numbers of tire pressure sensors

56)     Added basic functions and control unit matching for the chassis 156, 176, 246.

Control matching functions are as follows:

Resetting of learned values of component ‘Y68/3(All-wheel drive solenoid

valve)’

57). Added basic functions and actuation test for the KAB system under chassis 253.

58) Added basic functions, actuation test, and control unit matching for the RFK system under chassis 156.

Control matching functions are as follows: Calibration of steering angle sensor

Calibration of reversing camera

59). Optimized basic functions for the IRS-HLA system under chassis 156, 190.

60) Optimized basic functions for the SG-AWF system under chassis 156, 190. 61) Optimized basic functions for the FSCU system under chassis 190. 62) Added basic functions, actuation test, and control unit matching for the FSCU system under chassis 156, 292.

Control matching functions are as follows:

Display of SCN

63)              Optimized basic functions and actuation test for the ESP system under chassis 190.

64)              Added actuation test for the VG system under chassis 164, X164. 65) Added actuation test and control unit matching for the Suspension system

under chassis 164, X164, 251.

Control matching functions are as follows:

Pneumatic test of component A9/1 (AIRmatic compressor unit) Pneumatic test of component Left front level control valve

Pneumatic test of component Right front level control valve

Pneumatic test of component Left rear level control valve

Pneumatic test of component Right rear level control valve

Pneumatic test of component AIRmatic central reservoir charge valve

Pneumatic test of component AIRmatic pressure release valve

Pneumatic test of component Leakage test between compressor and valve block Pneumatic test of component Leakage test between valve block and suspension

struts

 Pneumatic test of componentLeakage test between valve block and central

reservoir

66)     Added control unit matching for the Suspension system under chassis 251, 211.

Control matching functions are as follows:

    Pneumatic test of component A9/1 (AIRmatic compressor unit)

67)     Added control unit matching for the ISM system under chassis 164, X164, 251, 216, 221.

Control matching functions are as follows:

Delete coding

Perform calibration

68)     Added basic functions, actuation test, and control unit matching for the ISM system under chassis 216, 221.

Control matching functions are as follows:

Perform calibration.

Detach the transport protection of control module ISM, personalize or

activate the control module.

Reset parameter Variant coding.

 

69)     Added basic functions, actuation test, and control unit matching for the ISM system under chassis 164, X164, 251.

Control matching functions are as follows:

Perform calibration.

Detach the transport protection of control module ISM, personalize or

activate the control module.

Reset parameter Variant coding

70)     Added actuation test for the HAQ system under chassis 164, X164.

71)     Added control unit matching for the DTR system under chassis 221, 216. 72) Added control unit matching and initialization function for the DTR system

under chassis 221, 216, 164, 251.

Control matching functions are as follows:

Sensor calibration

73)     Added basic functions and actuation test for the IRS-HLA system under chassis 164.

74)     Added basic functions and actuation test for the NAVI system under chassis 164/251/203/209/245/463.

75)     Added basic functions and actuation test for the Gearbox system under chassis 164.

76)     Added basic functions and actuation test for the TEL system under chassis 211/215/220/230/240.

77)     Added basic functions for the SDAR system under chassis 164, X164, 251, 245, 171, 203, 209, 211, 219, 215, 220, 230, 240, 463. 

78)     Added basic functions, actuation test, and control unit matching for the CTEL system under chassis 164, 251, 245, 169, 203, 209.

79)     Added basic functions and actuation test for the VCS system under chassis

164, X164, 251, 245, 171, 203, 209, 211, 219, 215, 220, 230, 240, 463, 169.  80) Added basic functions, control unit matching, initialization for the GPS

system under chassis 171, 211, 219, 215, 220, 240.

Control matching functions are as follows:

Write VIN (vehicle identification number)

81)     Added basic functions and control unit matching for the CDC system under

chassis 164, X164, 251, 169, 245, 171, 203, 209, 211, 219, 215, 220, 230, 463.  

Control matching functions are as follows:

 Restart of optical ring

82)     Added basic functions, actuation test, and coding for the AGW system under

chassis 164, X164, 251, 169, 245, 171, 203, 209, 211, 219, 215, 220, 230, 240, 463. 

83)     Added basic functions and coding for the MB-portal system under chassis 171 203 211 219 215 220 230, 240.

84)     Added basic functions, actuation test, control unit matching, and coding

for the NAVI system under chassis 171 203 211 219 215 220 230, 240.

Control matching functions are as follows:

Restart of optical ring

85)     Added basic functions and coding for the CTEL system under chassis 164 X164 251 169 245 171 203 209 211 219 215 220 230 240 463.

86)     Added basic functions, actuation test, control unit matching, coding, and

initialization for the E-CALL system under chassis 211, 215, 220, 230, 240.

Control matching functions are as follows:

Restart of optical ring

WriteVIN

 

2.      Optimized Functions

None

3.      Fixed Bugs

87)     Modified actuation test for the TPM system under chassis 245/169.     Test of signal transmission between A69/1(left front tire pressure sensor)

and N88(Tire pressure monitor control unit)

    Test of signal transmission between A69/2(right front tire pressure sensor)

and N88(Tire pressure monitor control unit)

    Test of signal transmission between A69/3(left rear tire pressure sensor)

and N88(Tire pressure monitor control unit)

Test of signal transmission between A69/4(rear right tire pressure sensor)

and N88(Tire pressure monitor control unit)

88)     Modified special functions for the ICM system under chassis 245/169.

Configuration for key 3

Customer-specific settings

89)     Modified special functions for the PTS system under chassis 245/169.

Special functions

    Vehicle version

90)     Added special functions for the AAC system under chassis 169 (As of 12/2005) /245 (As of 12/2005).

  Special functions:

  Teach-in of actuator motors after actuator motor replacement

  Breaking-in procedure after replacement of refrigerant compressor

 

BENZ_V48.90_EOBD22.53.rar

Ссылка на комментарий
Поделиться на другие сайты

53 минуты назад, 2xded сказал:

Попробовал. BIN, CODINGLIB, и т.д. пустые 

 

BENZ.JPG

https://dropmefiles.com/kEljw

 

Перезалил, пароль тот же. 

Ссылка на комментарий
Поделиться на другие сайты

Привет всем Вот ссылка на онлайн марки, который работает с диагнозом. Апк тоже там. Если кто-нибудь узнает как это сделать он-лайн  безплптно Мне тоже напишиье. Переставлять Не забудьте для регистрации )))

https://drive.google.com/file/d/19-7J4SfVdSeJRywe2e8w-jGicY3A9oWP/view?usp=drivesdk

Апк https://drive.google.com/file/d/1977xPOCS_DpUf7Daf0kuGZ3OV3QzIaNL/view?usp=drivesdk

Только что, Mig-miG сказал:

Привет всем Вот ссылка на онлайн марки, который работает с диагнозом. Апк тоже там. Если кто-нибудь узнает как это сделать он-лайн  безплптно Мне тоже напишиье. Переставлять Не забудьте для регистрации )))

https://drive.google.com/file/d/19-7J4SfVdSeJRywe2e8w-jGicY3A9oWP/view?usp=drivesdk

Апк https://drive.google.com/file/d/1977xPOCS_DpUf7Daf0kuGZ3OV3QzIaNL/view?usp=drivesdk

Для репута поставте + если нетрудно )

Ссылка на комментарий
Поделиться на другие сайты

1 час назад, algirdassg сказал:

Перезалил, пароль тот же. 

чё то у меня старый не катит 

Ссылка на комментарий
Поделиться на другие сайты

2 минуты назад, vergeltung сказал:

чё то у меня старый не катит 

Проблему у себя ищи...пароль подходит.

Ссылка на комментарий
Поделиться на другие сайты

Кто может помоч с марками? есть оригенал X-431 PRO красный свисток с планшетом   EOBD v22.62 вся вкладка RESET v10.60 и 1 марка BEIJING (BAIC) v10.11

 

Ссылка на комментарий
Поделиться на другие сайты

13 минут назад, crazyvovan сказал:

Кто может помоч с марками? есть оригенал X-431 PRO красный свисток с планшетом   EOBD v22.62 вся вкладка RESET v10.60 и 1 марка BEIJING (BAIC) v10.11

 

С такой авой могут и не помочь.

Уж больно она не традиционная)))))))))))))))

Ссылка на комментарий
Поделиться на другие сайты

6 минут назад, ev210 сказал:

С такой авой могут и не помочь.

Уж больно она не традиционная)))))))))))))))

ну дружище у кого какие проблемы по жизне! когда ставил аву даже мыслей в эту сторону не было! как говорится у кого что накипело))))) позитивная картинка да и только

Ссылка на комментарий
Поделиться на другие сайты

Ребят, кто сможет восстановить логин/пароль для 965290008845 ? китайцам написал но что-то маринуют ответ...

Ссылка на комментарий
Поделиться на другие сайты

Не стоит политику смешивать с диагностикой (со спортом, культурой и т.д.)

Идите на площадь и орите там.

На месте модератора, влепил бы бан без предупреждения. :(

Ссылка на комментарий
Поделиться на другие сайты

1 час назад, ev210 сказал:

С такой авой могут и не помочь.

Уж больно она не традиционная)))))))))))))))

 

1 час назад, crazyvovan сказал:

ну дружище у кого какие проблемы по жизне! когда ставил аву даже мыслей в эту сторону не было! как говорится у кого что накипело))))) позитивная картинка да и только

Думаю политика тут не к месту. Тут про Launch и про бесплатно. 

Ссылка на комментарий
Поделиться на другие сайты

24 минуты назад, AYP465 сказал:

Ребят, кто сможет восстановить логин/пароль для 965290008845 ? китайцам написал но что-то маринуют ответ...

Login yemishyan14

Email [email protected]

Ссылка на комментарий
Поделиться на другие сайты

3 часа назад, crazyvovan сказал:

Кто может помоч с марками? есть оригенал X-431 PRO красный свисток с планшетом   EOBD v22.62 вся вкладка RESET v10.60 и 1 марка BEIJING (BAIC) v10.11

 

1. Скачиваете "отлом"  Lom EOBD2_V22.62.rar, копируете в него файл LICENSE.DAT со своего EOBD2 v.22.62   

2. Скачиваете софт выложенный Ecuador-ом на 571стр.

3. Потом скопируете в каждую марку файлы "отлома" (вместе со своим LICENSE.DAT) и получите рабочий софт для своего адаптера.

Ссылка на комментарий
Поделиться на другие сайты

  • _____ закрыл тема
  • _____ открыл тема

Для публикации сообщений создайте учётную запись или авторизуйтесь

Вы должны быть пользователем, чтобы оставить комментарий

Создать аккаунт

Зарегистрируйте новый аккаунт в нашем сообществе. Это очень просто!

Регистрация нового пользователя

Войти

Уже есть аккаунт? Войти в систему.

Войти
  • Последние посетители   0 пользователей онлайн

    • Ни одного зарегистрированного пользователя не просматривает данную страницу
×
×
  • Создать...